DAC101S101CIMM/NOPB Part Information

Details for DAC101S101CIMM/NOPB by Texas Instruments

Semiconductors - ICs > Data & Signal Conversion > Digital-to-Analog Converters - DAC

Part Description

The DAC101S101 is a full-featured, general purpose 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7 V to 5.5 V supply and consumes just 175 µA of current at 3.6 Volts. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 30 MHz over the specified supply voltage range and is compatible with standard SPI, QSPI, MICROWIRE and DSP interfaces. Competitive devices are limited to 20 MHz clock rates at supply voltages in the 2.7 V to 3.6 V range. The supply voltage for the DAC101S101 serves as its voltage reference, providing the widest possible output dynamic range. A power-on reset circuit ensures that the DAC output powers up to zero volts and remains there until there is a valid write to the device. A power-down feature reduces power consumption to less than a microWatt.

Part Downloads

distributor space

Part Features

  • DAC101S101Q is AEC-Q100 Grade 1 Qualified and is Manufactured on an Automotive Grade Flow.
  • DNL +0.15, u20130.05 LSB (typical)
  • Ensured Monotonicity
  • Full-Scale Error u22120.06 %FS (typical)
  • Low Power Operation
  • Output Settling Time 8 u03bcs (typical)
  • Power Consumption
  • Power Down Feature
  • Power-on Reset to Zero Volts Output
  • Rail-to-Rail Voltage Output
  • Resolution 10 bits
  • Small Packages
  • Wide Power Supply Range of 2.7 V to 5.5 V
  • Wide Temperature Range of u221240u00b0C to +125u00b0C
  • Zero Code Error 3.3 mV (typical)

Part Specifications

Resolution (Bits) 10bit
Sampling Rate -
Input Channel Type Serial
Supply Voltage Range 2.7V to 5.5V
ADC / DAC Case Style SOP
No. of Pins 8Pins
Data Interface 3 Wire Serial
Operating Temperature Min -40°C
Operating Temperature Max 105°C
Product Range -
Automotive Qualification Standard -
RoHS Phthalates Compliant Yes
MSL MSL 1 - Unlimited
SVHC No SVHC (27-Jun-2018)
A/D / D/A Features 3-Wire Serial Interface SPI QSPI µWire DSP
Base Number 101
IC Case Style SOP
IC Generic Number 101S101
Linearity Error ADC / DAC + 0.15LSB
Linearity Error ADC / DAC - -0.05LSB
Logic Function Number 101
No. of Channels 1Channels
Operating Temperature Range -40°C to +105°C
Output Type Voltage
Settling Time 8µs
Supply Current 256µA
Supply Voltage Max 5.5V
Supply Voltage Min 2.7V
Termination Type Surface Mount Device
RoHS Compliant

Alternative Part Descriptions

  • 10Bit DAC w/R-to-R Output,DAC101S101CIMM | RS Components
  • IC, 10BIT DAC RL-RL O/P, POWERWISE; Resolution (Bits):10bit; Sampling Rate:-; Data Interface:3 Wire, Serial; Supply Voltage Range:2.7V to 5.5V; ADC / DAC Case Style:SOP; No. of Pins:8Pins; Input Channel Type:Serial; Operating RoHS Compliant: Yes | Newark Electronics
  • DAC 1-CH Resistor-String 10-bit 8-Pin MSOP T/R | Avnet Europe
  • 10-Bit Micro Power, RRO Digital-to-Analog Converter | Texas Instruments

Viewing Distributors for DAC101S101CIMM/NOPB

Loading...
Loading Results for DAC101S101CIMM/NOPB