TPS2552DBVT-1 Part Information
Details for TPS2552DBVT-1 by Texas Instruments
Electronic & Electrical Components>Semiconductors - ICs>Power Management
Part Description
The TPS255x and TPS255x-1 power-distribution switches are intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered and provide up to 1.5 A of continuous load current. These devices offer a programmable current-limit threshold between 75 mA and 1.7 A (typical) through an external resistor. Current-limit accuracy as tight as ±6% can be achieved at the higher current-limit settings. The power-switch rise and fall times are controlled to minimize current surges during turnon and turnoff. TPS255x devices limit the output current to a safe level by using a constant-current mode when the output load exceeds the current-limit threshold. TPS255x-1 devices provide circuit breaker functionality by latching off the power switch during overcurrent or reverse-voltage situations. An internal reverse-voltage comparator disables the powerswitch when the output voltage is driven higher than the input to protect devices on the input side of the switch. The FAULT output asserts low during overcurrent and reverse-voltage conditions.
Part Downloads
Download PCB Footprint from Ultra Librarian
Part Features
- 15-kV ESD Protection per IEC 61000-4-2 (With External Capacitance)
- 85-mu03a9 High-Side MOSFET (DBV Package)
- Adjustable Current Limit: 75 mA to 1700 mA (Typical)
- Backwards Compatible With TPS2550 and TPS2551
- Built-In Soft Start
- Constant-Current (TPS255x) and Latch-Off (TPS255x-1) Versions
- Fast Overcurrent Response - 2 u00b5s (Typical)
- Meets USB Current-Limiting Requirements
- Operating Range: 2.5 V to 6.5 V
- Reverse Input-Output Voltage Protection
- See the TI Switch Portfolio
- UL Listed u2013 File No. E169910 and NEMKO IEC60950-1-am1 ed2.0
- Up to 1.5-A Maximum Load Current
- u00b16% Current-Limit Accuracy at 1.7 A (Typical)
Part Specifications
| Power Load Switch Type | High Side |
| Input Voltage | 6.5V |
| Current Limit | 1.5A |
| On State Resistance | 0.085ohm |
| Distribution Switch Case Style | SOT-23 |
| No. of Pins | 6Pins |
| Thermal Protection | Yes |
| On / Enable Input Polarity | Active Low |
| No. of Outputs | 1Outputs |
| Operating Temperature Min | -40°C |
| Operating Temperature Max | 85°C |
| Product Range | - |
| Automotive Qualification Standard | - |
| RoHS Phthalates Compliant | Yes |
| MSL | MSL 1 - Unlimited |
| SVHC | No SVHC (27-Jun-2018) |
| Base Number | 2552 |
| Operating Temperature Range | -40°C to +85°C |
| Output Current Max | 1.2A |
| Power Dissipation Pd | 285mW |
| Supply Voltage Min | 2.5V |
| Termination Type | Surface Mount Device |
Alternative Part Descriptions
- 75mA - 1.5A, adjustable ILIMIT, 2.5-6.5V, Low enable, power switch, 85 mOhm, Latch Off On Fault | Texas Instruments
- Power Switch IC [Texas Instruments] TPS2552DBVT-1 Power Switch IC | Distrelec
