MAX17599ATE+T by Analog Devices

Low-IQ Wide-Input-Range Active-Clamp Current-Mode PWM Controllers


The MAX17598/MAX17599 low IQ, active clamp current-mode PWM controllers contain all the control circuitry required for the design of wide-input isolated/non-isolated forward-converter industrial power supplies. The MAX17598 is well-suited for universal input (rectified 85V AC to 265V AC) or telecom (36V DC to 72V DC) power supplies. The MAX17599 is optimized for low-voltage industrial supplies (4.5V DC to 36V DC). The devices include an AUX driver that drives an auxiliary MOSFET (clamp switch) that helps implement the active-clamp transformer reset topology for forward converters. Such a reset topology has several advantages including reduced voltage stress on the switches, transformer size reduction due to larger allowable flux swing, and improved efficiency due to elimination of dissipative snubber circuitry. Programmable dead time between the AUX and main driver allows for zero voltage switching (ZVS). The switching frequency is programmable from 100kHz to 1MHz for the devices with an accuracy of ±8% using an external resistor. This allows optimization of the magnetic and filter components, resulting in compact, cost-effective isolated/nonisolated power supplies. For EMI-sensitive applications, the ICs incorporate a programmable frequency-dithering scheme, enabling low-EMI spread-spectrum operation. An input undervoltage lockout (EN/UVLO) is provided for programming input-supply start voltage, and to ensure proper operation during brownout conditions. EN/UVLO input is also used to turn on/off the ICs. Input overvoltage (OVI) protection scheme is provided to make sure that the regulator shuts down when input supply exceeds its maximum allowed value. To control inrush current, the devices incorporate an SS pin to set the soft-start time for the regulators. Power dissipation under fault conditions is minimized by hiccup overcurrent protection (hiccup mode). Soft-stop feature provides safe discharging of the clamp capacitor when the device is turned off, and allows the controller to restart in a well-controlled manner. Additionally, negative current limit is provided in the current-sense circuitry, helping limit clamp switch current under dynamic operating conditions. SYNC feature is provided to synchronize multiple converters to a common external clock in noise-sensitive applications. Overtemperature fault triggers thermal shutdown for reliable protection of the device. The ICs are available in a 16-pin, TQFN package with 0.5 mm lead spacing.

Where to Buy

Prices starting from US$1.70

Distributor Stock
Logo for Farnell
Farnell
from US$1.83
637
in stock
Buy Now
Logo for Newark Electronics
Newark Electronics
from US$1.70
637
in stock
Buy Now
Logo for element14
element14
from US$1.75
637
in stock
Buy Now
Logo for Analog Devices
Analog Devices
from US$1.92
299
in stock
Buy Now

Features

Active Clamp, Peak Current-Mode Forward PWM Controller
20µA Startup Current in UVLO
4.5V to 36V Input-Supply Operating Range (MAX17599)
Programmable Input Undervoltage Lockout
Programmable Input Overvoltage Protection
Programmable 100kHz to 1MHz Switching Frequency
Switching Frequency Synchronization
Programmable Frequency Dithering for Low EMI Spread-Spectrum Operation
Programmable Dead Time
Adjustable Soft-Start
Programmable Slope Compensation
Fast Cycle-by-Cycle Peak-Current-Limit
70ns Internal Leading-Edge Current-Sense Blanking
Hiccup Mode Output Short-Circuit Protection
Soft-Stop for Well-Controlled Clamp Capacitor Discharge
Negative Clamp-Switch Current Limit
3mm x 3mm, Lead-Free 16-Pin TQFN
-40°C to +125°C Operating Temperature Range

Specifications

VIN (V) (min) 4.5
VIN (V) (max) 36
Topology Active Clamp Forward
Application (VIN) Base Station (24V)Industrial (24V)
Control Loop Current Mode
Feedback LinearOpto
Switching Frequency (kHz) 1000
Duty Cycle (%) (max) 73
Oper. Temp. (°C) -40 to +125
Package/Pins TQFN-CU/16
BudgetaryPrice (See Notes) 1.47


MAX17599ATE+T Semiconductors - ICs by Analog Devices

PWM CONTROLLER 1MHZ 36V TQFN-16

Status: Unknown
Series: -
RoHS: Unknown
Download Datasheet Visit Manufacturer Site View Pricing & Stock

Specifications

Input Voltage -
Output Voltage -
Output Current -
Supply Voltage Min 4.5V
Supply Voltage Max 36V
Controller IC Case Style TQFN
No. of Pins 16Pins
Frequency 1MHz
Operating Temperature Min -40°C
Operating Temperature Max 125°C
Product Range -
Automotive Qualification Standard -
RoHS Phthalates Compliant To Be Advised
MSL MSL 1 - Unlimited
SVHC No SVHC (15-Jan-2018)

Alternative Descriptions

Pwm Controller, 1Mhz, 36V, Tqfn-16 | Newark Electronics
PWM CONTROLLER, 1MHZ, 36V, TQFN-16 | element14
Active-Clamp Current-Mode PWM | Analog Devices

Frequently Asked Questions

Where can I find additional details, specifications and documents for a MAX17599ATE+T ?

Additional datasheets, footprints and schematics for MAX17599ATE+T are listed on our Part Details page. You can also find images and similar parts to MAX17599ATE+T on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for MAX17599ATE+T on our Product Comparison page. Access via the 'View Pricing & Stock' button to view MAX17599ATE+T price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the MAX17599ATE+T you can contact the distributor directly for product support, shipping queries etc.

Is the MAX17599ATE+T RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for MAX17599ATE+T have stock available?

Authorised distributors including Newark Electronics, element14, Farnell and Analog Devices have stock available or on a lead time for MAX17599ATE+T .

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for MAX17599ATE+T often in real-time on the comparison pages.

What if I can't find stock of MAX17599ATE+T ?

You can fill out our help required form which you can use to request a quote for MAX17599ATE+T from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.

We use cookies to improve your experience. See our privacy policy.
Okay