DSPIC33FJ128MC710AT-I/PT dsPIC33FJ128MC710A by Microchip Technology

16 Bit MCU/DSP 100LD 40MIPS 128KB FLASH

Status: Unknown
Series: -
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

dsPIC33F Motor Control Digital Signal Controller with seamless migration options to/from PIC24F, PIC24H MCUs & dsPIC30F DSC

Prices starting from US$6.04


Distributor Starting From Stock
Logo for Newark Electronics Newark Electronics US$6.89
-
Buy Now
Logo for RS Americas RS Americas US$9.91
-
Buy Now
Logo for Avnet America Avnet America -
-
Buy Now
View Full Pricing & Stock Comparison

Features

Operating Range:

Up to 40 MIPS operation (at 3.0-3.6V)
Industrial temperature range (-40u00b0C to +85u00b0C)
Extended temperature range (-40u00b0C to +125u00b0C)
High temperature range (-40u00b0C to +150u00b0C)

High-Performance DSC CPU:

Modified Harvard architecture
C compiler optimized instruction set
16-bit wide data path
24-bit wide instructions
Linear program memory addressing up to 4M instruction words
Linear data memory addressing up to 64 Kbytes
83 base instructions: mostly 1 word/1 cycle
Sixteen 16-bit General Purpose Registers
Two 40-bit accumulators:
With rounding and saturation options
Flexible and powerful addressing modes:
Indirect, Modulo and Bit-Reversed
Software stack
16 x 16 fractional/integer multiply operations
32/16 and 16/16 divide operations
Single-cycle multiply and accumulate:
Accumulator write back for DSP operations
Dual data fetch
Up to u00b116-bit shifts for up to 40-bit data

Direct Memory Access (DMA):

8-channel hardware DMA
2 Kbytes dual ported DMA buffer area (DMA RAM) to store data transferred via DMA:
Allows data transfer between RAM and a peripheral while CPU is executing code (no cycle stealing)
Most peripherals support DMA

Interrupt Controller:

5-cycle latency
118 interrupt vectors
Up to 67 available interrupt sources
Up to 5 external interrupts
7 programmable priority levels
5 processor exceptions

Digital I/O:

Wake-up/Interrupt-on-Change on up to 24 pins
Output pins can drive from 3.0V to 3.6V
All digital input pins are 5V tolerant
4 mA sink on all I/O pins System Management:
Flexible clock options:
External, crystal, resonator, internal RC
Fully integrated PLL
Extremely low jitter PLL
Power-up Timer
Oscillator Start-up Timer/Stabilizer
Watchdog Timer with its own RC oscillator
Fail-Safe Clock Monitor
Reset by multiple sources

Power Management:

On-chip 2.5V voltage regulator
Switch between clock sources in real time
Idle, Sleep and Doze modes with fast wake-up

Timers/Capture/Compare/PWM:

Timer/Counters, up to nine 16-bit timers:
Can pair up to make four 32-bit timers
1 timer runs as Real-Time Clock with external 32.768 kHz oscillator
Programmable prescaler
Input Capture (up to 8 channels):
Capture on up, down or both edges
16-bit capture input functions
4-deep FIFO on each capture
Output Compare (up to 8 channels):
Single or Dual 16-Bit Compare mode
16-bit Glitchless PWM mode

Communication Modules:

3-wire SPI (up to 2 modules):
Framing supports I/O interface to simple codecs
Supports 8-bit and 16-bit data
Supports all serial clock formats and sampling modes
I2Cu2122 (up to 2 modules):
Full Multi-Master Slave mode support
7-bit and 10-bit addressing
Bus collision detection and arbitration
Integrated signal conditioning
Slave address masking
UART (up to 2 modules):
Interrupt on address bit detect
Interrupt on UART error
Wake-up on Start bit from Sleep mode
4-character TX and RX FIFO buffers
LIN bus support
IrDAu00ae encoding and decoding in hardware
High-Speed Baud mode
Hardware Flow Control with CTS and RTS
Enhanced CAN (ECANu2122 module) 2.0B active (up to 2 modules):
Up to 8 transmit and up to 32 receive buffers
16 receive filters and 3 masks
Loopback, Listen Only and Listen All Messages modes for diagnostics and bus monitoring
Wake-up on CAN message
Automatic processing of Remote Transmission Requests
FIFO mode using DMA
DeviceNetu2122 addressing support

Motor Control Peripherals:

Motor Control PWM (up to 8 channels):
4 duty cycle generators
Independent or Complementary mode
Programmable dead time and output polarity
Edge or center-aligned
Manual output override control
Up to 2 Fault inputs
Trigger for ADC conversions
PWM frequency for 16-bit resolution (@ 40 MIPS) = 1220 Hz for Edge-Aligned mode, 610 Hz for Center-Aligned mode
PWM frequency for 11-bit resolution (@ 40 MIPS) = 39.1 kHz for Edge-Aligned mode, 19.55 kHz for Center-Aligned mode
Quadrature Encoder Interface module:
Phase A, Phase B and index pulse input
16-bit up/down position counter
Count direction status
Position Measurement (x2 and x4) mode
Programmable digital noise filters on inputs
Alternate 16-bit Timer/Counter mode
Interrupt on position counter rollover/underflow

Analog-to-Digital Converters (ADCs):

Up to two ADC modules in a device
10-bit, 1.1 Msps or 12-bit, 500 Ksps conversion:

Specifications

Family 16-bit DSC
Part Family dsPIC33FJ128MC710A
Part Prefix dsPIC
Architecture 16
Core 16-bit dsPIC DSC
MaxSpeed (MHz) 40
CPU Type 16-bit dsPIC DSC
CPU Speed (MIPS/DMIPS) 40
Program Memory Type Flash
SelfWrite Yes
Program Memory Size (KB) 128
Program Memory Size (KWords) 42
Secure Bootloader (CodeGuardâ„¢ Security) Advanced
RAM (bytes) 16384
Emulated EEPROM in Flash True
Direct Memory Access (DMA) Channels 8
Temp. Range Min. -40
Temp. Range Max. 150
Operation Voltage Min.(V) 3
Operation Voltage Max.(V) 3.6
Max I/O Pins 85
Pin Count 100
Brown Out Reset (BOR) BOR
Low Voltage Detection (LVD) None
Power On Reset (POR) Yes
Internal Oscillator 7.37 MHz, 32.768 kHz
Number of ADCs 2
ADC Channels 24
Diff ADC Inputs 4 Unipolar Differential Inputs
Max ADC Sampling Rate (ksps) 1100
Max ADC Resolution (bits) 12
Max ADC Sample/Hold (S/H) 1
UART 2
SPIâ„¢ 2
I2C 2
Max 16 Bit Digital Timers 9
Max 32 Bit Digital Timers 4
Watch Dog Timers (WDT) Yes
Timers 18
Motor Control PWM Channels 8
Standalone Output Compare/ Standard PWM 8
Input Capture 8
Max # PWM outputs (including complementary outputs) 16
Number of PWM Time Bases 2
PWM Max Resolution (bits) 16
PWM Resolution (time ns) 12
Output Compare Channels 8
USB Interface None
Number of CAN Modules 2
Type of CAN module CAN
CAN Transmit Buffers 8
CAN Receive Buffers 32
LIN Yes
IrDA Yes
Ethernet None
Integrated Wireless Frequency None
Wireless Technology None
Class B Hardware True
Quadrature Encoder Interface (QEI) 1
Parallel Port GPIO
JTAG Program/Boundary Scan
Debug Interface ICSP
Keydifferences DSP, CAN, HS-PWM
InstructionWord 24
Temperature Range -40C to +85C

Alternative Descriptions

Dsc, 40Mhz, 128Kb, Tqfp-100 | Newark Electronics
Digital Signal Processors, DSP, DSC 16Bit 40MIPS 128KB Flash | Microchip Technology Inc. DSPIC33FJ128MC710AT-I/PT | RS Americas
DSC, 40MHZ, 128KB, TQFP-100 | Farnell
MCU 16-bit dSPIC33 dsPIC RISC 128KB Flash 3.3V 100-Pin TQFP T/R | Avnet America


Frequently Asked Questions

Where can I find additional details, specifications and documents for a DSPIC33FJ128MC710AT-I/PT?

Additional datasheets, footprints and schematics for DSPIC33FJ128MC710AT-I/PT are listed on our Part Details page. You can also find images and similar parts to DSPIC33FJ128MC710AT-I/PT on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for DSPIC33FJ128MC710AT-I/PT on our Product Comparison page. Access via the 'View Pricing & Stock' button to view DSPIC33FJ128MC710AT-I/PT price breaks, MOQs, lead times, inventory and SKUs from distributors.

What category does DSPIC33FJ128MC710AT-I/PT fall under?

The DSPIC33FJ128MC710AT-I/PT is listed under dsPIC33FJ128MC710A.

Can I view similar or alternative parts?

You can view similar parts to DSPIC33FJ128MC710AT-I/PT when available in the dsPIC33FJ128MC710A range under the specifications section at the bottom of the details page.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the DSPIC33FJ128MC710AT-I/PT you can contact the distributor directly for product support, shipping queries etc.

Is the DSPIC33FJ128MC710AT-I/PT RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for DSPIC33FJ128MC710AT-I/PT have stock available?

Authorised distributors including Newark Electronics, RS Americas, Farnell and Avnet America have stock available or on a lead time for DSPIC33FJ128MC710AT-I/PT.

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for DSPIC33FJ128MC710AT-I/PT often in real-time on the comparison pages.

What if I can't find stock of DSPIC33FJ128MC710AT-I/PT?

You can fill out our help required form which you can use to request a quote for DSPIC33FJ128MC710AT-I/PT from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.

We use cookies to improve your experience. See our privacy policy.
Okay