DSPIC33FJ06GS202AT-E/MM by Microchip Technology

High-Speed PWM, ADC and Comparators

Status: Active
Series: dsPIC33FJ06GS202A
RoHS: Compliant
View Datasheet Manufacturer Site View Pricing & Stock

These devices offer features supporting common, multi-loop digital switch-mode power supplies (SMPS) and other digital power-conversion applications such as: AC to DC Converters, DC to DC Converters, Power Factor Correction (PFC), Uninterruptible power supply (UPS), Inverters, Embedded Power-Supply Controllers, Circuit Breakers, Arc Fault Detection, Digital Lighting

No distributors results available

View Full Pricing & Stock Comparison

Features

Operating Conditions
3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
Core: 16-Bit dsPIC33F CPU
Code Efficient (C and Assembly) Architecture
Two 40-Bit Wide Accumulators
Single-Cycle (MAC/MPY) with Dual Data Fetch
Single-Cycle Mixed-Sign MUL plus Hardware Divide
32-Bit Multiply Support
Clock Management
±2% Internal Oscillator
Programmable PLLs and Oscillator Clock Sources
Fail-Safe Clock Monitor (FSCM)
Independent Watchdog Timer (WDT)
Fast Wake-up and Start-up
Power Management
Low-Power Management modes (Sleep, Idle, Doze)
Integrated Power-on Reset and Brown-out Reset
2.0 mA/MHz Dynamic Current (typical)
135 µA IPD Current (typical)
High-Speed PWM
Up to Three PWM Pairs with Independent Timing
Dead Time for Rising and Falling Edges
1.04 ns PWM Resolution for Dead Time, Duty Cycle, Phase and Frequency
PWM Support for: DC/DC, AC/DC, Inverters, PFC and Lighting
Programmable Fault Inputs
Flexible Trigger Configurations for ADC Conversions
Advanced Analog Features
Two High-Speed Comparators with Direct Connection to the PWM module
ADC module: 10-bit resolution with Successive Approximation Register (SAR) converter (2 Msps) and three Sample-and-Hold (S&H) circuits
Up to 8 input channels grouped into four conversion pairs, plus two inputs for monitoring voltage references
Flexible and independent ADC trigger sources
Dedicated Result register for each analog channel
Timers/Output Compare/Input Capture
Two 16-Bit General Purpose Timers/Counters
Input Capture module
Output Compare module
Peripheral Pin Select (PPS) to allow Function Remap
Communication Interfaces
UART module (10 Mbps): With support for LIN/J2602 protocols and IrDA®
4-Wire SPI module
I2Câ„¢ module (up to 1 Mbaud) with SMBus Support
PPS to allow Function Remap

Specifications

Architecture 16
MaxSpeed (MHz) 40
CPU Speed (MIPS/DMIPS) 40
Program Memory Size (KB) 6
Multiple Flash Panels False
Temp. Range Min. -40
Temp. Range Max. 125
Operation Voltage Min.(V) 3
Operation Voltage Max.(V) 3.6
Pin Count 28
Low Power No
Number of Comparators 2
Number of ADCs 1
ADC Channels 6
Max ADC Resolution (bits) 10
Max ADC Sampling Rate (ksps) 2000
Number of DACs 2
DAC outputs 1
Max DAC Resolution (bits) 10
Hardware RTCC No
Motor Control PWM Channels 4
SMPS PWM Channels 4
Number of PWM Time Bases 2
Output Compare Channels 1
USB Interface None
Number of CAN Modules 0
Type of CAN module None
Crypto Engine No
Quadrature Encoder Interface (QEI) 0
Segment LCD 0
LCD/Graphics Interface No
Configurable Logic Cell Modules (CLC /CCL) 0
Peripheral Pin Select (PPS)/Pin Muxing Yes
Pins | Packaging 28 | QFN-S
Temp Range -40C to +125C
Packing Media Tape and reel (1600)

Resources






Reference Manuals
Section 01. Introduction - dsPIC33F FRM
Section 02. CPU - dsPIC33F FRM
Section 03. Data Memory - dsPIC33F/PIC24H FRM
Section 04. Program Memory - dsPIC33F/PIC24H FRM
Section 05. Flash Programming - dsPIC33F/PIC24H FRM
Section 08. Reset - dsPIC33F FRM
Section 09. Watchdog Timer and Power-Saving Modes - dsPIC33F/PIC24H FRM
Section 10. I/O Ports - dsPIC33F/PIC24H FRM
Section 11. Timers - dsPIC33F/PIC24H FRM
Section 12. Input Capture - dsPIC33F FRM
Section 24. Programming and Diagnostics - dsPIC33F/PIC24H FRM
Section 25. Device Configuration - dsPIC33F/PIC24H FRM
Section 26. Development Tool Support - dsPIC33F FRM
Section 44. High-Speed 10-Bit ADC - dsPIC33F/PIC24H FRM
Section 45. High-Speed Analog Comparator - dsPIC33F/PIC24H FRM
Section 41. Interrupts (Part IV) - dsPIC33F/PIC24H FRM
Section 42. Oscillator (Part IV) - dsPIC33F/PIC24H FRM
Section 30. I/O Ports with Peripheral Pin Select (PPS) - dsPIC33F/PIC24H FRM
dsPIC33/PIC24 FRM, UART
dsPIC33/PIC24 FRM, I2C
dsPIC33/PIC24 FRM, Output Compare
dsPIC33/PIC24 FRM, Serial Peripheral Interface (SPI)

Environmental Information

JEDEC Indicator e3
ROHS Compliant
China EFUP Compliant
Device Weight (g) 0.1016
Shipping Weight (kg) 0.41875
Lead Count 28
Package Type QFN-S
Package Width or Size 6x6x0.9mm
Soldering Composition Matte Tin


Frequently Asked Questions

Where can I find additional details, specifications and documents for a DSPIC33FJ06GS202AT-E/MM?

Additional datasheets, footprints and schematics for DSPIC33FJ06GS202AT-E/MM are listed on our Part Details page. You can also find images and similar parts to DSPIC33FJ06GS202AT-E/MM on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for DSPIC33FJ06GS202AT-E/MM on our Product Comparison page. Access via the 'View Pricing & Stock' button to view DSPIC33FJ06GS202AT-E/MM price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the DSPIC33FJ06GS202AT-E/MM you can contact the distributor directly for product support, shipping queries etc.

Is the DSPIC33FJ06GS202AT-E/MM RoHS compliant?

Yes. This part has been flagged as RoHS Compliant by Microchip Technology.

Which authorised distributors for DSPIC33FJ06GS202AT-E/MM have stock available?

There is no stock from authorised distributors for DSPIC33FJ06GS202AT-E/MM.

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for DSPIC33FJ06GS202AT-E/MM often in real-time on the comparison pages.

What if I can't find stock of DSPIC33FJ06GS202AT-E/MM?

You can fill out our help required form which you can use to request a quote for DSPIC33FJ06GS202AT-E/MM from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.

We use cookies to improve your experience. See our privacy policy.
Okay