DS90CR216AMTD/NOPB Part Information

Details for DS90CR216AMTD/NOPB by Texas Instruments

Electronic & Electrical Components > Semiconductors - ICs > Driver & Interface ICs

Part Description

The DS90CR286A receiver converts the four LVDS data streams back into parallel 28 bits of LVCMOS data. Also available is the DS90CR216A receiver that converts the three LVDS data streams back into parallel 21 bits of LVCMOS data. The outputs of both receivers strobe on the rising edge. The receiver LVDS clock operates at rates from 20 to 66 MHz. The device phase-locks to the input clock, samples the serial bit streams at the LVDS data lines, and converts them into parallel output data. At an incoming clock rate of 66 MHz, each LVDS input line is running at a bit rate of 462 Mbps, resulting in a maximum throughput of 1.848 Gbps for the DS90CR286A and 1.386 Gbps for the DS90CR216A. The DS90CR286A and DS90CR216A devices are enhanced over prior generation receivers and provide a wider data valid time on the receiver output. The use of these serial link devices is ideal for solving EMI and cable size problems associated with transmitting data over wide, high speed parallel LVCMOS interfaces. Both devices are offered in TSSOP packages.

Part Downloads

distributor space

Part Features

  • 20 to 66 MHz Shift Clock Support
  • 50% Duty Cycle on Receiver Output Clock
  • Automotive Q Grade Available - AEC-Q100 Grade
  • Bestu2013inu2013Class Set and Hold Times on Rx Outputs
  • Compatible with TIA/EIA-644 LVDS Standard
  • ESD Rating > 7 kV (HBM), > 700 V (EIAJ)
  • Low Profile 56-Pin or 48-Pin DGG (TSSOP) Package
  • Operating Temperature: u221240u00b0C to 85u00b0C
  • PLL Requires No External Components
  • Rx Power Consumption < 270 mW (Typ) at 66 MHz Worst Case
  • Rx Power-Down Mode < 200 u03bcW (Max)

Part Specifications

Device Type LVDS Receiver
Peak-to-Peak Jitter Max 250ps
Supply Current Max 90mA
Operating Temperature Min -40°C
Operating Temperature Max 85°C
Supply Voltage Min 3V
Supply Voltage Max 3.6V
Driver Case Style TSSOP
No. of Pins 48Pins
Signaling Rate 1.386Gbps
Signal Input Type LVDS
Output Level Type CMOS TTL
ESD HBM 7kV
Product Range -
Automotive Qualification Standard -
RoHS Phthalates Compliant Yes
MSL MSL 2 - 1 year
SVHC No SVHC (27-Jun-2018)
Audio IC Case Style TSSOP
Base Number 90
Data Rate 1386Mbps
No. of Receivers 4Receivers
Operating Temperature Range -40°C to +85°C
Propagation Delay 1.8ns
Supply Current 81mA
Supply Voltage Range 3V to 3.6V
Termination Type Surface Mount Device
RoHS Compliant

Alternative Part Descriptions

  • IC, RECEIVER; Device Type:LVDS Receiver; Peak-to-Peak Jitter Max:250ps; Supply Current Max:90mA; Operating Temperature Min:-40°C; Operating Temperature Max:85°C; Supply Voltage Min:3V; Supply Voltage Max:3.6V; Driver Case RoHS Compliant: Yes | Newark Electronics

Viewing Distributors for DS90CR216AMTD/NOPB

Loading...
Loading Results for DS90CR216AMTD/NOPB