Status: | Active |
---|---|
Series: | ATSAMD10D14 |
RoHS: | Compliant |
A low-power, high-performance ARM® Cortex®-M0+ based flash microcontroller, the Microchip's ATSAMD10D14 is ideal for a wide range of home automation, consumer, metering and industrial applications. It features:
Supported by MPLAB X IDE and MPLAB Harmony.
No distributors results available
View Full Pricing & Stock ComparisonSingle-cycle hardware multiplier |
Micro Trace Buffer |
16KB in-system self-programmable Flash |
4KB SRAM Memory |
Power-on reset (POR) and brown-out detection (BOD) |
Internal and external clock options with 48MHDigital Frequency Locked Loop (DFLL48M) and 48MHto 96MHFractional |
Digital Phase Locked Loop (FDPLL96M) |
External Interrupt Controller (EIC) |
8 external interrupts |
One non-maskable interrupt |
Two-pin Serial Wire Debug (SWD) programming, test and debugging interface |
Idle and standby sleep modes |
SleepWalking peripherals |
6-channel Direct Memory Access Controller (DMAC) |
6-channel Event System |
One 16-bit TC with compare/capture channels |
One 8-bit TC with compare/capture channels |
One 32-bit TC with compare/capture channels, by using two TCs |
Up to four compare channels with optional complementary output |
Generation of synchronized pulse width modulation (PWM) pattern across port pins |
Deterministic fault protection, fast decay and configurable dead-time between complementary output |
Dithering that increase resolution with up to 5 bit and reduce quantization error |
32-bit Real Time Counter (RTC) with clock/calendar function |
Watchdog Timer (WDT) |
CRC-32 generator |
USART with full-duplex and single-wire half-duplex configuration |
I2C Bus up to 3.4MHz |
SMBUS/PMBUS |
SPI |
LIN client |
Differential and single-ended input |
1/2x to 16x programmable gain stage |
Automatic offset and gain error compensation |
Oversampling and decimation in hardware to support 13-, 14-, 15- or 16-bit resolution |
10-bit, 350ksps Digital-to-Analog Converter (DAC) |
Two Analog Comparators (AC) with window compare function |
Up to 72-channel capacitive touch and proximity sensing |
Up to 22 GPIO pins |
24-pin QFN |
20-pin SOIC |
20-pin WLCSP |
1.62V – 3.63V |
Part Family | SAMD10 |
---|---|
CPU Type | Cortex-M0+ |
MaxSpeed (MHz) | 48 |
Program Memory Size (KB) | 16 |
SRAM (KB) | 4 |
Data EEPROM (bytes) | 0 |
Temp. Range Min. | -40 |
Temp. Range Max. | 105 |
Operation Voltage Min.(V) | 1.62 |
Operation Voltage Max.(V) | 3.63 |
Direct Memory Access (DMA) Channels | 6 |
SPI™ | 3 |
I2C | 3 |
UART | 3 |
I2S | 0 |
Ethernet | None |
Quadrature Encoder Interface (QEI) | 0 |
Hardware Touch Peripheral | PTC |
Crypto Engine | No |
Number of USB Modules | 0 |
USB Interface | None |
Number of CAN Modules | 0 |
Type of CAN module | None |
ADC Channels | 10 |
Max ADC Resolution (bits) | 12 |
Max ADC Sampling Rate (ksps) | 350 |
Number of DACs | 1 |
Input Capture | 3 |
Standalone Output Compare/ Standard PWM | 4 |
Motor Control PWM Channels | 8 |
Max 16 Bit Digital Timers | 2 |
Number of Comparators | 2 |
Internal Oscillator | 32khz, 32Khz ULP, 8Mhz |
Hardware RTCC | Yes |
Max I/O Pins | 22 |
Pin Count | 24 |
Low Power | Yes |
Data Sheets |
---|
SAM D10 Datasheet |
SAMD10 datasheet summary |
Board Design Files |
---|
STK600-RC032SAM-79 |
STK600-RC048SAM-78 |
STK600-RC064SAM-87 |
STK600-RC048SAM-88 |
STK600-RC032SAM-89 |
STK600-RC064SAM-72 |
Brochures |
---|
32-bit Microcontroller Families Brochure |
32-bit Peripherals Quick Reference Card |
32-bit MCU Low Power Sell Sheet |
Design Checklist |
---|
Basic 32-Bit MCU Design and Troubleshooting Checklist |
Miscellaneous |
---|
QTouch Library Selection Guide |
JEDEC Indicator | e1 |
---|---|
ROHS | Compliant |
China EFUP | Compliant |
Device Weight (g) | 0.0038 |
Shipping Weight (kg) | 0.16 |
Lead Count | 20 |
Package Type | WLCSP |
Package Width or Size | 1.934x2.434x0.483mm |
Soldering Composition | SAC405 |
Where can I find additional details, specifications and documents for a ATSAMD10D14A-UUTB5?
Additional datasheets, footprints and schematics for ATSAMD10D14A-UUTB5 are listed on our Part Details page. You can also find images and similar parts to ATSAMD10D14A-UUTB5 on this page.
What pricing and inventory information can I view?
Distributor pricing and stock information is available for ATSAMD10D14A-UUTB5 on our Product Comparison page. Access via the 'View Pricing & Stock' button to view ATSAMD10D14A-UUTB5 price breaks, MOQs, lead times, inventory and SKUs from distributors.
Who can I contact for technical support of the product?
Submit any questions directly to the customer support team of the distributor listing the product. For the ATSAMD10D14A-UUTB5 you can contact the distributor directly for product support, shipping queries etc.
Is the ATSAMD10D14A-UUTB5 RoHS compliant?
Yes. This part has been flagged as RoHS Compliant by Microchip Technology.
Which authorised distributors for ATSAMD10D14A-UUTB5 have stock available?
There is no stock from authorised distributors for ATSAMD10D14A-UUTB5.
How do I check stock and lead times for all distributors?
Stock availability and lead times will be displayed for ATSAMD10D14A-UUTB5 often in real-time on the comparison pages.
What if I can't find stock of ATSAMD10D14A-UUTB5?
You can fill out our help required form which you can use to request a quote for ATSAMD10D14A-UUTB5 from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.