MXD1818UR22+T by Analog Devices

Low-Power µP Reset Circuits in 3-Pin SC70/SOT23

Status: Active
Series: MXD1818
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

The MXD1810–MXD1813/MXD1815–MXD1818 family of microprocessor (µP) reset circuits monitor power supplies in µP and digital systems. These devices provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +2.5V/+3.0V/+3.3V (MXD1815–MXD1818), and +5V (MXD1810–MXD1813) systems. These circuits assert a reset signal whenever the VCC supply voltage declines below a preset threshold, keeping reset asserted for at least 100ms after VCC rises above the reset threshold. The MXD1813/MXD1818 also keep reset asserted for at least 100ms after the output is momentarily pulled to GND by an external push-button switch. The MXD1812/MXD1817 have an active-high push-pull RESET output. The MXD1810/MXD1815 (push-pull) and MXD1811/MXD1813/MXD1816/MD1818 (open-drain) have an active-low RESET output. The open-drain devices (MXD1811/MXD1813/MXD1816/MXD1818) have an internal pullup resistor to VCC. The MXD1813/MXD1818 feature a debounced manual reset feature that asserts a reset if the active-low RESET pin is pulled low for more than 1.5µs. When used to initiate manual reset, active-low RESET debounces signals from devices such as mechanical switches. For devices with this feature, the release of the external switch triggers the reset period. The MXD1810–MXD1813/MXD1815–MXD1818 are guaranteed to output the correct logic state for VCC down to +1V. These ICs provide a reset comparator designed to ignore fast transients on VCC. Reset thresholds are available between +2.18V and +4.62V. These small, low-power (4µA) devices are ideal for use in portable equipment. All are available in space-saving 3-pin SC70 and SOT23 packages, and are specified from -40°C to +105°C.

Prices starting from US$1.45


Distributor Starting From Stock
Logo for Newark Electronics Newark Electronics US$1.63
1,840
Buy Now
Logo for element14 element14 US$1.58
1,840
Buy Now
View Full Pricing & Stock Comparison

Features

Precision Monitoring of +2.5V, +3V, +3.3V, and +5V Power-Supply Voltages Available in Four Reset Output Configurations Factory-Set Reset Threshold Voltages: 2.18V, 2.31V, 2.55V, 2.88V, 3.06V, 4.12V, 4.37V, 4.62V ±2.5% Reset Threshold Accuracy Over Temperature Fixed Reset Timeout Period: 100ms (min) Guaranteed RESET/active-low RESET Valid to VCC = +1V Debounced Manual Reset Detect (MXD1813/MXD1818) Power-Supply Transient Immunity No External Components Low Power Consumption (4µA) Pin Compatible with DS181_ Products (SOT23) 3-Pin SC70 and SOT23 Packages
Available in Four Reset Output Configurations
Factory-Set Reset Threshold Voltages: 2.18V, 2.31V, 2.55V, 2.88V, 3.06V, 4.12V, 4.37V, 4.62V
±2.5% Reset Threshold Accuracy Over Temperature
Fixed Reset Timeout Period: 100ms (min)
Guaranteed RESET/active-low RESET Valid to VCC = +1V
Debounced Manual Reset Detect (MXD1813/MXD1818)
Power-Supply Transient Immunity
No External Components
Low Power Consumption (4µA)
Pin Compatible with DS181_ Products (SOT23)
3-Pin SC70 and SOT23 Packages

Specifications

Reset Thresh. (V) 1.8 to 2.52.5 to 3.3
Reset Thresh. Accur. (%) (@ +25°C) 1.5
Reset Out Active LowOpen Drain
tRESET (min) 85ms to 300ms
Watchdog Feature No Watchdog
Supervisor Features Manual Reset
ICC (µA) (max) 10
Package/Pins SOT23/3
BudgetaryPrice (See Notes) 1.29


MXD1818UR22+T Power Management ICs - PMIC by Analog Devices

MPU SUPERVISOR 5.5V SOT-23-3

Status: Unknown
Series: -
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

Specifications

Threshold Voltage 2.18V
No. of Supervisors / Monitors 1Monitors
Supply Voltage Min 1.2V
Supply Voltage Max 5.5V
Reset Type Active-Low Open-Drain
Digital IC Case SOT-23
No. of Pins 3Pins
Delay Time 150ms
Operating Temperature Min -40°C
Operating Temperature Max 105°C
Product Range -
Automotive Qualification Standard -
MSL MSL 1 - Unlimited
SVHC No SVHC (15-Jan-2018)

Alternative Descriptions

Mpu Supervisor, 5.5V, Sot-23-3 | Newark Electronics
MPU SUPERVISOR, 5.5V, SOT-23-3 | element14

Frequently Asked Questions

Where can I find additional details, specifications and documents for a MXD1818UR22+T ?

Additional datasheets, footprints and schematics for MXD1818UR22+T are listed on our Part Details page. You can also find images and similar parts to MXD1818UR22+T on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for MXD1818UR22+T on our Product Comparison page. Access via the 'View Pricing & Stock' button to view MXD1818UR22+T price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the MXD1818UR22+T you can contact the distributor directly for product support, shipping queries etc.

Is the MXD1818UR22+T RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for MXD1818UR22+T have stock available?

Authorised distributors including Newark Electronics, element14 and Farnell have stock available or on a lead time for MXD1818UR22+T .

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for MXD1818UR22+T often in real-time on the comparison pages.

What if I can't find stock of MXD1818UR22+T ?

You can fill out our help required form which you can use to request a quote for MXD1818UR22+T from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.

We use cookies to improve your experience. See our privacy policy.
Okay