MAX9392EHJ+ by Analog Devices

Anything-to-LVDS Dual 2 x 2 Crosspoint Switches

Status: Active
Series: MAX9392
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

The MAX9392/MAX9393 dual 2 x 2 crosspoint switches perform high-speed, low-power, and low-noise signal distribution. The MAX9392/MAX9393 multiplex one of two differential input pairs to either or both low-voltage differential signaling (LVDS) outputs for each channel. Independent enable inputs turn on or turn off each differential output pair. Four LVCMOS/LVTTL logic inputs (two per channel) control the internal connections between inputs and outputs. This flexibility allows for the following configurations: 2 x 2 crosspoint switch, 2:1 mux, 1:2 splitter, or dual repeater. This makes the MAX9392/MAX9393 ideal for protection switching in fault-tolerant systems, loopback switching for diagnostics, fanout buffering for clock/data distribution, and signal regeneration. Fail-safe circuitry forces the outputs to a differential low condition for undriven inputs or when the common-mode voltage exceeds the specified range. The MAX9392 provides high-level input fail-safe detection for LVDS, HSTL, and other GND-referenced differential inputs. The MAX9393 provides low-level input fail-safe detection for LVPECL, CML, and other VCC-referenced differential inputs. Ultra-low 98ps(P-P) (max) pseudorandom bit sequence (PRBS) jitter ensures reliable communications in high-speed links that are highly sensitive to timing error, especially those incorporating clock-and-data recovery, or serializers and deserializers. The high-speed switching performance guarantees 1.5GHz operation and less than 67ps (max) skew between channels. LVDS inputs and outputs are compatible with the TIA/EIA-644 LVDS standard. The LVDS outputs drive 100Ω loads. The MAX9392/MAX9393 are offered in a 32-pin TQFP package and operate over the extended temperature range (-40°C to +85°C). Also see the MAX9390/MAX9391 for the crossflow version.

Prices starting from US$10.13


Distributor Starting From Stock
Logo for element14 element14 US$12.93
390
Buy Now
Logo for Newark Electronics Newark Electronics US$11.37
-
Buy Now
View Full Pricing & Stock Comparison

Features

1.5GHz Operation with 250mV Differential Output Swing
2psRMS (max) Random Jitter
AC Specifications Guaranteed for 150mV Differential Input
Signal Inputs Accept Any Differential Signaling Standard
LVDS Outputs for Clock or High-Speed Data
High-Level Input Fail-Safe Detection (MAX9392)
Low-Level Input Fail-Safe Detection (MAX9393)
3.0V to 3.6V Supply Voltage Range
LVCMOS/LVTTL Logic Inputs Control Signal Routing

Specifications

Signal Type (Rx) CMLHSTLLVDSLVPECL
Signal Type (Tx) LVDS
Functions Switch
# Rx 4
# Tx 4
Propagation Delay (ps) (max) 565
VSUPPLY (V) 3.3
Package/Pins TQFP/32
BudgetaryPrice (See Notes) 8.52


MAX9392EHJ+ Semiconductors - ICs by Analog Devices

DIGITAL CROSS POINT SWITCH 2X2 TQFP-32

Status: Unknown
Series: -
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

Specifications

Crosspoint Switch Type Digital
Input / Output Configuration CML HSTL / LVDS
Control Interface -
Supply Voltage Min 3V
Supply Voltage Max 3.6V
Digital IC Case TQFP
No. of Pins 32Pins
Operating Temperature Min -40°C
Operating Temperature Max 85°C
Product Range -
RoHS Phthalates Compliant To Be Advised
MSL MSL 1 - Unlimited
SVHC No SVHC (15-Jan-2018)

Alternative Descriptions

DIGITAL CROSS POINT SWITCH, 2X2, TQFP-32 | element14
Digital Cross Point Switch, 2X2, Tqfp-32 | Newark Electronics

Frequently Asked Questions

Where can I find additional details, specifications and documents for a MAX9392EHJ+ ?

Additional datasheets, footprints and schematics for MAX9392EHJ+ are listed on our Part Details page. You can also find images and similar parts to MAX9392EHJ+ on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for MAX9392EHJ+ on our Product Comparison page. Access via the 'View Pricing & Stock' button to view MAX9392EHJ+ price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the MAX9392EHJ+ you can contact the distributor directly for product support, shipping queries etc.

Is the MAX9392EHJ+ RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for MAX9392EHJ+ have stock available?

Authorised distributors including element14, Farnell and Newark Electronics have stock available or on a lead time for MAX9392EHJ+ .

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for MAX9392EHJ+ often in real-time on the comparison pages.

What if I can't find stock of MAX9392EHJ+ ?

You can fill out our help required form which you can use to request a quote for MAX9392EHJ+ from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.

We use cookies to improve your experience. See our privacy policy.
Okay