MAX9152EUE+ by Analog Devices

800Mbps, LVDS/LVPECL-to-LVDS 2 x 2 Crosspoint Switch

Status: Active
Series: MAX9152
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

he MAX9152 2 x 2 crosspoint switch is designed for applications requiring high speed, low power, and low-noise signal distribution. This device includes two LVDS/LVPECL inputs, two LVDS outputs, and two logic inputs that set the internal connections between differential inputs and outputs. The MAX9152 can be programmed to connect any input to either or both outputs, allowing it to be used in the following configurations: 2 5 2 crosspoint switch, 2:1 mux, 1:2 demux, 1:2 splitter, or dual repeater. This flexibility makes the MAX9152 ideal for protection switching in fault-tolerant systems, loopback switching for diagnostics, fanout buffering for clock/data distribution, and signal regeneration for communication over extended distances. Ultra-low 120psPK-PK (max) PRBS jitter ensures reliable communications in high-speed links that are highly sensitive to timing error, especially those incorporating clock-and-data recovery, or serializers and deserializers. The high-speed switching performance guarantees an 800Mbps data rate and less than 50ps (max) skew between channels. LVDS inputs and outputs are compatible with the TIA/EIA-644 LVDS standard. The LVDS inputs are designed to also accept LVPECL signals directly, and PECL signals with an attenuation network. The LVDS outputs are designed to drive 75Ω or 100Ω loads, and feature a selectable differential output resistance to minimize reflections. The MAX9152 is available in 16-pin TSSOP and SO packages, and consumes only 109mW while operating from a single +3.3V supply over the -40°C to +85°C temperature range.

Prices starting from US$4.72


Distributor Starting From Stock
Logo for Chip One Stop Chip One Stop US$4.72
76
Buy Now
Logo for element14 element14 US$5.83
-
Buy Now
Logo for Newark Electronics Newark Electronics -
-
Buy Now
View Full Pricing & Stock Comparison

Features

Pin-Programmable Configuration 2 x 2 Crosspoint Switch 2:1 Mux 1:2 Demux 1:2 Splitter Dual Repeater
2 x 2 Crosspoint Switch
2:1 Mux
1:2 Demux
1:2 Splitter
Dual Repeater
Ultra-Low 120psPK-PK (max) Jitter with 800Mbps, PRBS = 223 -1 Data Pattern
Low 50ps (max) Channel-to-Channel Skew
109mW Power Dissipation
Compatible with ANSI TIA/EIA-644 LVDS Standard
Inputs Accept LVDS/LVPECL Signals
LVDS Output Rated for 75Ω and 100Ω Loads
Pin-Programmable Differential Output Resistance
Pin-Compatible Upgrade to DS90CP22 (SO Package)
Available in 16-Pin TSSOP Package (Half the Size of SO)

Specifications

Signal Type (Rx) LVDSLVPECL
Signal Type (Tx) LVDS
Functions Switch
# Rx 2
# Tx 2
Data Rates (Mbps) 800
Propagation Delay (ps) (max) 3400
VSUPPLY (V) 3.3
Package/Pins SOIC (N)/16TSSOP/16
BudgetaryPrice (See Notes) 5.13


MAX9152EUE+ Semiconductors - ICs by Analog Devices

DIGITAL CROSS POINT SWITCH 2X2 TSSOP16

Status: Unknown
Series: -
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

Specifications

Crosspoint Switch Type Digital
Input / Output Configuration LVDS LVPECL / LVDS
Control Interface -
Supply Voltage Min 3V
Supply Voltage Max 3.6V
Digital IC Case TSSOP
No. of Pins 16Pins
Operating Temperature Min -40°C
Operating Temperature Max 85°C
Product Range -
RoHS Phthalates Compliant To Be Advised
MSL MSL 1 - Unlimited
SVHC No SVHC (15-Jan-2018)

Alternative Descriptions

DIGITAL CROSS POINT SWITCH, 2X2, TSSOP16 | Farnell
Digital Cross Point Switch, 2X2, Tssop16 | Newark Electronics

Frequently Asked Questions

Where can I find additional details, specifications and documents for a MAX9152EUE+ ?

Additional datasheets, footprints and schematics for MAX9152EUE+ are listed on our Part Details page. You can also find images and similar parts to MAX9152EUE+ on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for MAX9152EUE+ on our Product Comparison page. Access via the 'View Pricing & Stock' button to view MAX9152EUE+ price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the MAX9152EUE+ you can contact the distributor directly for product support, shipping queries etc.

Is the MAX9152EUE+ RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for MAX9152EUE+ have stock available?

Authorised distributors including Chip One Stop, element14, Farnell and Newark Electronics have stock available or on a lead time for MAX9152EUE+ .

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for MAX9152EUE+ often in real-time on the comparison pages.

What if I can't find stock of MAX9152EUE+ ?

You can fill out our help required form which you can use to request a quote for MAX9152EUE+ from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.

We use cookies to improve your experience. See our privacy policy.
Okay