MAX9051AEUT+T by Analog Devices

Micropower, Single-Supply, UCSP/SOT23 Comparator + Precision Reference ICs

Status: Active
Series: MAX9051
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

The MAX9038–MAX9043 and MAX9050–MAX9053 feature combinations of low-power comparators and precision voltage references. Their operating voltage range makes them ideal for both 3V and 5V systems. The MAX9038/MAX9039/MAX9040/MAX9041/MAX9050/MAX9051 have a single comparator and reference consuming only 40µA of supply current. The MAX9042/MAX9043/MAX9052/MAX9053 have dual comparators and one reference, and consume only 55µA of supply current. Low-voltage operation and low supply current make these devices ideal for battery-operated systems. The comparators feature rail-to-rail inputs and outputs, with a common-mode input voltage range that extends 250mV beyond the supply rails. Input bias current is typically 1.0pA, and input offset voltage is typically 0.5mV. Internal hysteresis ensures clean output switching, even with slow-moving input signals. The output stage features a unique design that limits supply current surges while switching, virtually eliminating supply glitches typical of many other comparators. This design also minimizes overall power consumption under dynamic conditions. The comparator outputs have rail-to- rail, push-pull output stages except the MAX9038 has an open-drain output that sinks and sources up to 8mA. The propagation delay is 400ns, even with the low-operating supply current. The reference output voltage is set to 1.23V in the MAX9038/MAX9039, to 2.048V in the MAX9040–MAX9043, and to 2.500V in the MAX9050–MAX9053. The MAX9040–MAX9043 and the MAX9050–MAX9053 are offered in two grades: an A grade with 0.4% initial accuracy and 6ppm/°C tempco, and a B grade with 1% initial accuracy (except MAX9038/MAX9039 have an initial accuracy of ±0.4%) and 100ppm/°C tempco. The voltage references feature a proprietary curvature-correction circuit and laser-trimmed thin-film resistors. These series-mode references can sink or source up to 500µA of load current.

Prices starting from US$2.14


Distributor Starting From Stock
Logo for Newark Electronics Newark Electronics US$2.17
150
Buy Now
Logo for element14 element14 US$2.14
150
Buy Now
View Full Pricing & Stock Comparison

Features

Comparator + Precision Reference in UCSP/SOT23
2.5V to 5.5V Single-Supply Operation (MAX9038–MAX9043)
Low Supply Current (MAX9038/MAX9039/MAX9040/MAX9041/MAX9050/MAX9051) 40µA Quiescent 50µA with 100kHz Switching Open-Drain Output MAX9038
40µA Quiescent
50µA with 100kHz Switching
Open-Drain Output MAX9038
400ns Propagation Delay
Rail-to-Rail Inputs
Rail-to-Rail Output Stage Sinks and Sources 8mA
Internal ±3mV Hysteresis
Voltage Reference Offers ±0.4% (max) Initial Accuracy (A Grade) 6ppm/°C (typ) Temperature Coefficient (A Grade) Stable for 0 to 4.7nF Capacitive Loads
±0.4% (max) Initial Accuracy (A Grade)
6ppm/°C (typ) Temperature Coefficient (A Grade)
Stable for 0 to 4.7nF Capacitive Loads

Specifications

tPD (µs) (typ) 0.4
VOS (mV) (max) 7
VSUPPLY (V) (min) 2.7
VSUPPLY (V) (max) 5.5
# Comparators 1
Thresh. (V) 2.5
Oper. Temp. (°C) -40 to +85
Package/Pins SOIC (N)/8SOT23/6
BudgetaryPrice (See Notes) 1.6


MAX9051AEUT+T Amplifiers & Comparators by Analog Devices

MICROPWR COMPARATOR PUSH PULL SOT-23-6

Status: Unknown
Series: -
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

Specifications

Comparator Type Micropower
No. of Comparators 1 Comparator, 1
Response Time -
Supply Voltage Range 2.7V to 5.5V
Comparator Case Style SOT-23
No. of Pins 6Pins
IC Output Type Push Pull
Operating Temperature Min -40°C
Operating Temperature Max 85°C
Product Range -
Automotive Qualification Standard -
MSL MSL 1 - Unlimited
SVHC No SVHC (15-Jan-2018)

Alternative Descriptions

MICROPWR COMPARATOR, PUSH PULL, SOT-23-6 | Farnell Contract
Micropwr Comparator, Push Pull, Sot-23-6 | Newark Electronics

Frequently Asked Questions

Where can I find additional details, specifications and documents for a MAX9051AEUT+T ?

Additional datasheets, footprints and schematics for MAX9051AEUT+T are listed on our Part Details page. You can also find images and similar parts to MAX9051AEUT+T on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for MAX9051AEUT+T on our Product Comparison page. Access via the 'View Pricing & Stock' button to view MAX9051AEUT+T price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the MAX9051AEUT+T you can contact the distributor directly for product support, shipping queries etc.

Is the MAX9051AEUT+T RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for MAX9051AEUT+T have stock available?

Authorised distributors including Farnell Contract, Newark Electronics and element14 have stock available or on a lead time for MAX9051AEUT+T .

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for MAX9051AEUT+T often in real-time on the comparison pages.

What if I can't find stock of MAX9051AEUT+T ?

You can fill out our help required form which you can use to request a quote for MAX9051AEUT+T from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.

We use cookies to improve your experience. See our privacy policy.
Okay