MAX5853ETL+ by Analog Devices

Dual, 10-Bit, 80Msps, Current-Output DAC

Status: Active
Series: MAX5853
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

The MAX5853 dual, 10-bit, 80Msps digital-to-analog converter (DAC) provides superior dynamic performance in wideband communication systems. The device integrates two 10-bit DAC cores, and a 1.24V reference. The converter supports single-ended and differential modes of operation. The MAX5853 dynamic performance is maintained over the entire 2.7V to 3.6V power-supply operating range. The analog outputs support a -1.0V to +1.25V compliance voltage. The MAX5853 can also operate in interleave data mode to reduce the I/O pin count. This allows the converter to be updated on a single, 10-bit bus. The MAX5853 features digital control of channel gain matching to within ±0.4dB in sixteen 0.05dB steps. Channel matching improves sideband suppression in analog quadrature modulation applications. The on-chip 1.24V bandgap reference includes a control amplifier that allows external full-scale adjustments of both channels through a single resistor. The internal reference can be disabled and an external reference may be applied for high-accuracy applications. The MAX5853 features full-scale current outputs of 2mA to 20mA and operates from a 2.7V to 3.6V single supply. The DAC supports three modes of power-control operation: normal, low-power standby, and complete power-down. In power-down mode, the operating current is reduced to 1µA. The MAX5853 is packaged in a 40-pin thin QFN with exposed paddle (EP) and is specified for the extended (-40°C to +85°C) temperature range. Pin-compatible, higher speed, and lower resolution versions are also available. Refer to the MAX5854 (10-bit, 165Msps), the MAX5852 (8-bit, 165Msps), and the MAX5851 (8-bit, 80Msps) data sheets for more information. See Table 4 at the end of the data sheet.

Prices starting from US$9.79


Distributor Starting From Stock
Logo for Newark Electronics Newark Electronics US$10.32
7
Buy Now
Logo for element14 element14 US$12.87
7
Buy Now
View Full Pricing & Stock Comparison

Features

10-Bit, 80Msps Dual DAC
Low Power 77mW with IFS = 5mA at fCLK = 80MHz
77mW with IFS = 5mA at fCLK = 80MHz
2.7V to 3.6V Single Supply
Full Output Swing and Dynamic Performance at 2.7V Supply
Superior Dynamic Performance 78dBc SFDR at fOUT = 20MHz
78dBc SFDR at fOUT = 20MHz
Programmable Channel Gain Matching
Integrated 1.24V Low-Noise Bandgap Reference
Single-Resistor Gain Control
Interleaved Data Mode
Single-Ended and Differential Clock Input Modes
Miniature 40-Pin Thin QFN Package, 6mm x 6mm
EV Kit Available MAX5854 EV Kit

Specifications

Resolution (bits) 10
# Channels 2
fCLK (Msps) 80
SFDR (dBc) (@ fOUT) 78 @ 10MHz
THD (dBc) (@ fOUT) -76 @ 10MHz
DNL (±LSB) 0.2
INL (±LSB) 0.25
PDISS (mW) 173
Interface Parallel
VSUPPLY (V) 3.3
Package/Pins TQFN/40
BudgetaryPrice (See Notes) 8.59


MAX5853ETL+ Data & Signal Conversion by Analog Devices

DAC 10BIT DUAL TQFN-40

Status: Unknown
Series: -
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

Specifications

Resolution (Bits) 10bit
Sampling Rate -
Input Channel Type Parallel
Supply Voltage Range 2.7V to 3.6V
ADC / DAC Case Style TQFN
No. of Pins 40Pins
Data Interface Parallel
Operating Temperature Min -40°C
Operating Temperature Max 85°C
Product Range -
Automotive Qualification Standard -
RoHS Phthalates Compliant To Be Advised
MSL MSL 1 - Unlimited
SVHC No SVHC (15-Jan-2018)

Alternative Descriptions

Dac, 10Bit, Dual, Tqfn-40 | Newark Electronics
DAC, 10BIT, DUAL, TQFN-40 | element14

Frequently Asked Questions

Where can I find additional details, specifications and documents for a MAX5853ETL+ ?

Additional datasheets, footprints and schematics for MAX5853ETL+ are listed on our Part Details page. You can also find images and similar parts to MAX5853ETL+ on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for MAX5853ETL+ on our Product Comparison page. Access via the 'View Pricing & Stock' button to view MAX5853ETL+ price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the MAX5853ETL+ you can contact the distributor directly for product support, shipping queries etc.

Is the MAX5853ETL+ RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for MAX5853ETL+ have stock available?

Authorised distributors including Newark Electronics, element14 and Farnell have stock available or on a lead time for MAX5853ETL+ .

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for MAX5853ETL+ often in real-time on the comparison pages.

What if I can't find stock of MAX5853ETL+ ?

You can fill out our help required form which you can use to request a quote for MAX5853ETL+ from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.

We use cookies to improve your experience. See our privacy policy.
Okay