MAX5183BEEI+ by Analog Devices

Dual, 10-Bit, 40MHz, Current/Voltage Simultaneous-Output DACs

Status: Active
Series: MAX5183
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

The MAX5180 contains two 10-bit, simultaneous-update, current-output digital-to-analog converters (DACs) designed for superior performance in communications systems requiring analog signal reconstruction with low distortion and low-power operation. The MAX5183 provides equal specifications, with on-chip precision resistors for voltage output operation. The devices are designed for 10pV-s glitch operation to minimize unwanted spurious signal components at the output. An on-board 1.2V bandgap circuit provides a well-regulated, low-noise reference that can be disabled for external reference operation. The MAX5180/MAX5183 are designed to provide a high level of signal integrity for the least amount of power dissipation. The DACs operate from a single supply of 2.7V to 3.3V. Additionally, these DACs have three modes of operation: normal, low-power standby, and complete shutdown, which provides the lowest possible power dissipation with 1µA (max) shutdown current. A fast wake-up time (0.5µs) from standby mode to full DAC operation conserves power by activating the DACs only when required. The MAX5180/MAX5183 are packaged in a 28-pin QSOP and are specified for the extended (-40°C to +85°C) temperature range. For lower-resolution, dual 8-bit versions, refer to the MAX5186/MAX5189 data sheet.

Prices starting from US$5.16


Distributor Starting From Stock
Logo for CoreStaff CoreStaff US$5.16
25
Buy Now
Logo for element14 element14 US$7.13
-
Buy Now
View Full Pricing & Stock Comparison

Features

2.7V to 3.3V Single-Supply Operation
Wide Spurious-Free Dynamic Range: 70dB at fOUT = 2.2MHz
Fully Differential Outputs for Each DAC
±0.5% FSR Gain Mismatch
±0.2° Phase Mismatch
Low-Current Standby or Full-Shutdown Modes
Internal 1.2V Low-Noise Bandgap Reference
Small 28-Pin QSOP Package

Specifications

Resolution (bits) 10
# Channels 2
fCLK (Msps) 40
SFDR (dBc) (@ fOUT) 70 @ 2.2MHz
THD (dBc) (@ fOUT) -68 @ 2.2MHz
DNL (±LSB) 0.5
INL (±LSB) 0.5
PDISS (mW) 20.7
Interface Parallel
VSUPPLY (V) 3
Package/Pins QSOP/28
BudgetaryPrice (See Notes) 5.7


MAX5183BEEI+ Data & Signal Conversion by Analog Devices

DAC 10BIT DUAL QSOP-28

Status: Unknown
Series: -
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

Specifications

Resolution (Bits) 10bit
Sampling Rate -
Input Channel Type Parallel
Supply Voltage Range 2.7V to 3.3V
ADC / DAC Case Style QSOP
No. of Pins 28Pins
Data Interface Parallel
Operating Temperature Min -40°C
Operating Temperature Max 85°C
Product Range -
Automotive Qualification Standard -
RoHS Phthalates Compliant To Be Advised
MSL MSL 1 - Unlimited
SVHC No SVHC (15-Jan-2018)

Alternative Descriptions

DAC, 10BIT, DUAL, QSOP-28 | Farnell

Frequently Asked Questions

Where can I find additional details, specifications and documents for a MAX5183BEEI+ ?

Additional datasheets, footprints and schematics for MAX5183BEEI+ are listed on our Part Details page. You can also find images and similar parts to MAX5183BEEI+ on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for MAX5183BEEI+ on our Product Comparison page. Access via the 'View Pricing & Stock' button to view MAX5183BEEI+ price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the MAX5183BEEI+ you can contact the distributor directly for product support, shipping queries etc.

Is the MAX5183BEEI+ RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for MAX5183BEEI+ have stock available?

Authorised distributors including CoreStaff, element14 and Farnell have stock available or on a lead time for MAX5183BEEI+ .

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for MAX5183BEEI+ often in real-time on the comparison pages.

What if I can't find stock of MAX5183BEEI+ ?

You can fill out our help required form which you can use to request a quote for MAX5183BEEI+ from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.

We use cookies to improve your experience. See our privacy policy.
Okay