MAX2121ETI+ by Analog Devices

Complete Direct-Conversion L-Band Tuner

Status: Active
Series: MAX2121
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

The MAX2121 low-cost, direct-conversion tuner IC is designed for satellite set-top and VSAT applications. The device directly converts the satellite signals from the LNB to baseband using a broadband I/Q downconverter. The operating frequency range extends from 925MHz to 2175MHz. The device includes an LNA and an RF variable-gain amplifier, I and Q downconverting mixers, and baseband lowpass filters and digitally controlled baseband variable-gain amplifiers. Together, the RF and baseband variable-gain amplifiers provide more than 80dB of gain control range. The device includes fully monolithic VCOs, as well as a complete fractional-N frequency synthesizer. Additionally, an on-chip crystal oscillator is provided along with a buffered output for driving additional tuners and demodulators. Synthesizer programming and device configuration are accomplished with a 2-wire serial interface. The IC features a VCO autoselect (VAS) function that automatically selects the proper VCO. For multituner applications, the device can be configured to have one of two 2-wire interface addresses. A low-power standby mode is available whereupon the signal path is shut down while leaving the reference oscillator, digital interface, and buffer circuits active, providing a method to reduce power in single and multituner applications. The device is the most advanced broadband/VSAT DBS tuner available. The low noise figure eliminates the need for an external LNA. A small number of passive components are needed to form a complete broadband satellite tuner DVB-S2 RF front-end solution. The tuner is available in a very small, 5mm x 5mm, 28-pin thin QFN package.

Prices starting from US$6.68


Distributor Starting From Stock
Logo for Newark Electronics Newark Electronics US$7.40
15
Buy Now
Logo for element14 element14 US$7.10
15
Buy Now
View Full Pricing & Stock Comparison

Features

925MHz to 2175MHz Frequency Range
Monolithic VCO Low Phase Noise: -97dBc/Hz at 10kHz No Calibration Required
Low Phase Noise: -97dBc/Hz at 10kHz
No Calibration Required
High Dynamic Range: -75dBm to 0dBm
Integrated LP Filters: 123.75MHz
Single +3.3V ±5% Supply
Low-Power Standby Mode
Address Pin for Multituner Applications
Differential I/Q Interface
I²C 2-Wire Serial Interface
Very Small, 5mm x 5mm, 28-Pin TQFN Package

Specifications

End Equipment VSAT
Input Frequency (MHz) 925 to 2175
IF Output Frequency (MHz) 123.75
Ref. Clock Freq. (MHz) 12 to 30
Noise Figure (dB) (typ) 8
VSUPPLY (V) 3.13 to 3.47
ISUPPLY (mA) 148
Footprint (mm x mm) 5.0 x 5.0
Oper. Temp. (°C) -40 to +85
Package/Pins TQFN/28
BudgetaryPrice (See Notes) 4.73


MAX2121ETI+ - Integrated Circuits by Analog Devices

DIRECT CONVERSION TUNER IC TQFN-28

Status: Unknown
Series: -
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

Specifications

IC Function Tuner IC
Supply Voltage Min 3.13V
Supply Voltage Max 3.47V
IC Package Type TQFN
No. of Pins 28Pins
Operating Temperature Min -40°C
Operating Temperature Max 85°C
Product Range -
Automotive Qualification Standard -
RoHS Phthalates Compliant To Be Advised
MSL MSL 1 - Unlimited
SVHC No SVHC (15-Jan-2018)

Alternative Descriptions

Direct Conversion Tuner Ic, Tqfn-28 | Newark Electronics
DIRECT CONVERSION TUNER IC, TQFN-28 | element14

Frequently Asked Questions

Where can I find additional details, specifications and documents for a MAX2121ETI+ ?

Additional datasheets, footprints and schematics for MAX2121ETI+ are listed on our Part Details page. You can also find images and similar parts to MAX2121ETI+ on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for MAX2121ETI+ on our Product Comparison page. Access via the 'View Pricing & Stock' button to view MAX2121ETI+ price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the MAX2121ETI+ you can contact the distributor directly for product support, shipping queries etc.

Is the MAX2121ETI+ RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for MAX2121ETI+ have stock available?

Authorised distributors including Newark Electronics, element14 and Farnell have stock available or on a lead time for MAX2121ETI+ .

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for MAX2121ETI+ often in real-time on the comparison pages.

What if I can't find stock of MAX2121ETI+ ?

You can fill out our help required form which you can use to request a quote for MAX2121ETI+ from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.

We use cookies to improve your experience. See our privacy policy.
Okay