MAX16029TG+ by Analog Devices

Dual-/Triple-/Quad-Voltage, Capacitor-Adjustable, Sequencing/Supervisory Circuits

Status: Active
Series: MAX16029
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

The MAX16025–MAX16030 are dual-/triple-/quad-voltage monitors and sequencers that are offered in a small TQFN package. These devices offer enormous design flexibility as they allow fixed and adjustable thresholds to be selected through logic inputs and provide sequence timing through small external capacitors. These versatile devices are ideal for use in a wide variety of multivoltage applications. As the voltage at each monitored input exceeds its respective threshold, its corresponding output goes high after a propagation delay or a capacitor-set time delay. When a voltage falls below its threshold, its respective output goes low after a propagation delay. Each detector circuit also includes its own enable input, allowing the power-good outputs to be shut off independently. The independent output for each detector is available with push-pull or open-drain configuration with the open-drain version capable of supporting voltages up to 28V, thereby allowing them to interface to shutdown and enable inputs of various DC-DC regulators. Each detector can operate independently as four separate supervisory circuits or can be daisy-chained to provide controlled power-supply sequencing. The MAX16025–MAX16030 also include a reset function that deasserts only after all of the independently monitored voltages exceed their threshold. The reset timeout is internally fixed or can be adjusted externally. These devices are offered in a 4mm x 4mm TQFN package and are fully specified from -40°C to +125°C.

Prices starting from US$4.15


Distributor Starting From Stock
Logo for Newark Electronics Newark Electronics US$7.55
317
Buy Now
Logo for element14 element14 US$6.24
317
Buy Now
Logo for CoreStaff CoreStaff US$4.15
2
Buy Now
View Full Pricing & Stock Comparison

Features

2.2V to 28V Operating Voltage Range
Fixed Thresholds for 3.3V, 2.5V, 1.8V, 1.5V, and 1.2V Systems
1.5% Accurate Adjustable Threshold Monitors Voltages Down to 0.5V
2.7% Accurate Fixed Thresholds Over Temperature
Fixed (140ms min)/Capacitor-Adjustable Delay Timing
Independent Open-Drain/Push-Pull Outputs
Enable Inputs for Each Monitored Voltage
9 Logic-Selectable Threshold Options
Manual Reset and Tolerance Select (5%/10%) Inputs
Small, 4mm x 4mm TQFN Package
Fully Specified from -40°C to +125°C

Specifications

Reset Thresh. (V) 0 to 1.21.2 to 1.81.8 to 2.52.5 to 3.33.3 to 5.5>=5.5
Reset Thresh. Accur. (%) (@ +25°C) 1.5
Reset Out Active LowOpen Drain
tRESET (min) 1ms to 15ms15ms to 85ms85ms to 300ms300ms to 1s<1ms>1sAdjustable
Watchdog Feature No Watchdog
Supervisor Features Adjustable Reset InputHigh Voltage (>6V)Manual ResetPower Fail Comparator/Low Battery Detect
ICC (µA) (max) 75
Package/Pins TQFN/24


MAX16029TG+ Power Management ICs - PMIC by Analog Devices

MPU SUPERVISOR QUAD 28V TQFN-24

Status: Unknown
Series: -
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

The MAX16025–MAX16030 are dual-/triple-/quad-volt- age monitors and sequencers that are offered in a small TQFN package. These devices offer enormous design flexibility as they allow fixed and adjustable thresholds to be selected through logic inputs and pro- vide sequence timing through small external capaci- tors. These versatile devices are ideal for use in a wide variety of multivoltage applications. As the voltage at each monitored input exceeds its respective threshold, its corresponding output goes high after a propagation delay or a capacitor-set time delay. When a voltage falls below its threshold, its respective output goes low after a propagation delay. Each detector circuit also includes its own enable input, allowing the power-good outputs to be shut off inde- pendently. The independent output for each detector is available with push-pull or open-drain configuration with the open-drain version capable of supporting volt- ages up to 28V, thereby allowing them to interface to shutdown and enable inputs of various DC-DC regula- tors. Each detector can operate independently as four separate supervisory circuits or can be daisy-chained to provide controlled power-supply sequencing. The MAX16025–MAX16030 also include a reset func- tion that deasserts only after all of the independently monitored voltages exceed their threshold. The reset timeout is internally fixed or can be adjusted externally. These devices are offered in a 4mm x 4mm TQFN package and are fully specified from -40°C to +125°C.

Specifications

Threshold Voltage 3.052V
No. of Supervisors / Monitors 4Monitors
Supply Voltage Min 2.2V
Supply Voltage Max 28V
Reset Type Active-Low Open-Drain
Digital IC Case TQFN
No. of Pins 24Pins
Delay Time 190ms
Operating Temperature Min -40°C
Operating Temperature Max 125°C
Product Range -
Automotive Qualification Standard -
MSL MSL 1 - Unlimited
SVHC No SVHC (15-Jan-2018)

Alternative Descriptions

MPU SUPERVISOR, QUAD, 28V, TQFN-24 | Farnell
Mpu Supervisor, Quad, 28V, Tqfn-24 | Newark Electronics

Frequently Asked Questions

Where can I find additional details, specifications and documents for a MAX16029TG+ ?

Additional datasheets, footprints and schematics for MAX16029TG+ are listed on our Part Details page. You can also find images and similar parts to MAX16029TG+ on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for MAX16029TG+ on our Product Comparison page. Access via the 'View Pricing & Stock' button to view MAX16029TG+ price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the MAX16029TG+ you can contact the distributor directly for product support, shipping queries etc.

Is the MAX16029TG+ RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for MAX16029TG+ have stock available?

Authorised distributors including Farnell, Newark Electronics, element14 and CoreStaff have stock available or on a lead time for MAX16029TG+ .

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for MAX16029TG+ often in real-time on the comparison pages.

What if I can't find stock of MAX16029TG+ ?

You can fill out our help required form which you can use to request a quote for MAX16029TG+ from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.

We use cookies to improve your experience. See our privacy policy.
Okay