MAX14970ETP+ by Analog Devices

Ruggedized 6Gbps SATA Redriver with High ESD and Extended Temperature Operation

Status: Active
Series: MAX14970
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

The MAX14970 dual-channel buffer with input equalization and preemphasis is ideal to redrive internal serial-ATA (SATA) 1i, 2i, and 3i signals as well as eSATA 1m and 2m signals. The device features high electrostatic discharge (ESD) ±8kV Human Body Model (HBM) protection. The device can be placed near a SATA connector on the motherboard to overcome board losses and guarantee SATA compliance. The device is SATA specification version 3.0 (gold standard) compliant and can also be pin-configured for SATA specification version 2.6 (gold standard) compliance. The device features hardware SATA-drive cable detection that automatically places the device into a standby mode that consumes less than 20μA (typ) standby current when no drive is connected. In addition, the device features an independent channel dynamic power-down mode where power consumption is reduced when no input signal is present. The device maintains output common-mode levels to meet internal SATA version 3.0 standards and prevent delays when coming out of low-power mode. The device preserves signal integrity at the receiver by reestablishing full output levels and reducing the total system jitter (TJ) by providing equalization. The device features channel-independent digital preemphasis controls to drive SATA outputs over longer trace lengths to meet internal SATA specifications. SATA out-of-band (OOB) signaling is supported using high-speed out-of-band signal detection on the inputs, and squelch on the corresponding outputs. Inputs and outputs are all internally 50Ω terminated and must be AC-coupled to the SATA controller IC and SATA device. The device operates from a single +3.3V (typ) supply, is available in a small, 4mm x 4mm TQFN package with flow-through traces for ease of layout, and is specified over the extended -40°C to +85°C operating temperature range.

Prices starting from US$5.74


Distributor Starting From Stock
Logo for Newark Electronics Newark Electronics US$7.37
2,181
Buy Now
Logo for Farnell Farnell US$5.74
2,181
Buy Now
View Full Pricing & Stock Comparison

Features

Robust Solution for Harsh Environments Extended Temp Rating: -40°C to +85°C High ESD Protection on All Pins: ±8kV (HBM) Package for Resistance to Vibration/Shocks
Extended Temp Rating: -40°C to +85°C
High ESD Protection on All Pins: ±8kV (HBM)
Package for Resistance to Vibration/Shocks
Unique Power Saving Design Standby State: < 1mW (typ) Dynamic Power-Down State: Reduced Idle State: 52.8mW (typ) Active State: 231mW (typ)
Standby State: < 1mW (typ)
Dynamic Power-Down State: Reduced
Idle State: 52.8mW (typ)
Active State: 231mW (typ)
Design Flexibility Input Equalization and Selectable Output Preemphasis Single 3.3V Supply Operation SATA 3i (6.0Gbps), SATA 2i/2m (3.0Gbps), and SATA 1i/1m(1.5Gbps) Compatible
Input Equalization and Selectable Output Preemphasis
Single 3.3V Supply Operation
SATA 3i (6.0Gbps), SATA 2i/2m (3.0Gbps), and SATA 1i/1m(1.5Gbps) Compatible

Specifications

Functions Equalizer/Re-Driver
Interface SATA
Data Rate (Mbps) (max) 6000
VSUPPLY (V) 3.3
ICC (mA) (typ) 70
# Channels 2
Package/Pins TQFN/20
Oper. Temp. (°C) -40 to +85
BudgetaryPrice (See Notes) 4.59


MAX14970ETP+ - Integrated Circuits by Analog Devices

SATA REDRIVER 6GBPS TQFN-20

Status: Unknown
Series: -
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

The MAX14970 dual-channel buffer with input equaliza- tion and preemphasis is ideal to redrive internal serial-ATA (SATA) 1i, 2i, and 3i signals as well as eSATA 1m and 2m signals. The device features high electrostatic discharge (ESD), ±8kV Human Body Model (HBM) protection. The device can be placed near a SATA connector on the moth- erboard to overcome board losses and guarantee SATA compliance. The device is SATA specification version 3.0 (gold standard) compliant and can also be pin configured for SATA specification version 2.6 (gold standard) compliance. The device features hardware SATA-drive cable detection that automatically places the device into a standby mode that consumes less than 20µA (typ) standby current when no drive is connected. In addition, the device features an independent channel dynamic power-down mode where power consumption is reduced when no input signal is present. The device maintains output common-mode levels to meet internal SATA version 3.0 standards and prevent delays when coming out of low-power mode. The device preserves signal integrity at the receiv­ er by reestablishing full output levels and reducing the total sys- tem jitter (TJ) by providing equalization. The device fea- tures channel-independent digital preemphasis controls to drive SATA outputs over longer trace lengths to meet internal SATA specifications. SATA out-of-band (OOB) signaling is supported using high-speed out-of-band signal detection on the inputs, and squelch on the cor- responding outputs. Inputs and outputs are all internally 50Ω terminated and must be AC-coupled to the SATA controller IC and SATA device. The device operates from a single +3.3V (typ) supply, is available in a small, 4mm x 4mm TQFN package with flow- through traces for ease of layout, and is specified over the extended -40ºC to +85ºC operating temperature range.

Specifications

IC Function SATA Redriver
Supply Voltage Min 3V
Supply Voltage Max 3.6V
IC Package Type TQFN
No. of Pins 20Pins
Operating Temperature Min -40°C
Operating Temperature Max 85°C
Product Range -
Automotive Qualification Standard -
RoHS Phthalates Compliant To Be Advised
MSL MSL 1 - Unlimited
SVHC No SVHC (15-Jan-2018)

Alternative Descriptions

Sata Redriver, 6Gbps, -40 To 85Deg C | Newark Electronics
SATA REDRIVER, 6GBPS, -40 TO 85DEG C | Farnell
Rugged Sata 6gbps Redriver Esd ExtTemp | RS

Frequently Asked Questions

Where can I find additional details, specifications and documents for a MAX14970ETP+ ?

Additional datasheets, footprints and schematics for MAX14970ETP+ are listed on our Part Details page. You can also find images and similar parts to MAX14970ETP+ on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for MAX14970ETP+ on our Product Comparison page. Access via the 'View Pricing & Stock' button to view MAX14970ETP+ price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the MAX14970ETP+ you can contact the distributor directly for product support, shipping queries etc.

Is the MAX14970ETP+ RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for MAX14970ETP+ have stock available?

Authorised distributors including Newark Electronics, Farnell and RS have stock available or on a lead time for MAX14970ETP+ .

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for MAX14970ETP+ often in real-time on the comparison pages.

What if I can't find stock of MAX14970ETP+ ?

You can fill out our help required form which you can use to request a quote for MAX14970ETP+ from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.

We use cookies to improve your experience. See our privacy policy.
Okay