MAX14921ECS+ by Analog Devices

High-Accuracy 12-/16-Cell Measurement AFEs


The MAX14920/MAX14921 battery measurement analog front-end devices accurately sample cell voltages and provide level shifting for primary/secondary battery packs up to 16 cells/+65V (max). The MAX14920 monitors up to 12 cells, while the MAX14921 monitors up to 16 cells. Both devices simultaneously sample all cell voltages, allowing accurate state-of-charge and source-resistance determination. All cell voltages are level shifted to ground reference with unity gain, simplifying external ADC data conversion. The devices have a low-noise, low-offset amplifier that buffers differential voltages of up to +5V, allowing monitoring of all common lithium-ion (Li+) cell technologies. The resulting cell voltage error is ±0.5mV. The devices’ high accuracy make them ideal for monitoring cell chemistries with very flat discharge curves, such as lithium-metal phosphate. Passive-cell balancing is supported by external FET drivers. Integrated diagnostics in the devices allow open-wire detection and undervoltage/overvoltage alarms. The devices are controlled by a daisy-chainable SPI interface. The MAX14920 is available in a 64-pin (10mm x 10mm) TQFP package with an exposed pad. The MAX14921 is available in an 80-pin (12mm x 12mm) TQFP package. Both devices are specified over the -40°C to +85°C extended temperature range.

Where to Buy

Prices starting from US$10.00

Distributor Stock
Logo for RS
RS
from US$12.12
270
in stock
Buy Now
Logo for Newark Electronics
Newark Electronics
from US$11.41
97
in stock
Buy Now
Logo for element14
element14
from US$10.56
97
in stock
Buy Now
Logo for Farnell
Farnell
from US$10.00
97
in stock
Buy Now

Features

High Accuracy ±0.5mV (max) Cell Voltage Error Simultaneous Cell Voltage Sampling Self-Calibration
±0.5mV (max) Cell Voltage Error
Simultaneous Cell Voltage Sampling
Self-Calibration
Integrated Diagnostics Open-Wire and Short Fault Detection Undervoltage/Overvoltage Warning Thermal Shutdown
Open-Wire and Short Fault Detection
Undervoltage/Overvoltage Warning
Thermal Shutdown
High Flexibility SPI Interface 12-Cell and 16-Cell Versions +6V Minimum (3 Cells) Operation +0.5V to +4.5V Cell Voltage Range Integrated Cell-Balancing FET Drivers Integrated 5V LDO
SPI Interface
12-Cell and 16-Cell Versions
+6V Minimum (3 Cells) Operation
+0.5V to +4.5V Cell Voltage Range
Integrated Cell-Balancing FET Drivers
Integrated 5V LDO
Low Power 1µA Shutdown Mode 1µA/10µA Cell Current Draw
1µA Shutdown Mode
1µA/10µA Cell Current Draw

Specifications

Functions Status Monitor
Battery Type 3-16 Cell Li-Ion
Interface SPI
Parameters Measured TemperatureVoltage
End Equipment Pack
Battery Protection Features Over-TemperatureOver/Under Voltage
VSUPPLY (V) (min) 6
VSUPPLY (V) (max) 65
Package/Pins TQFP/80
Oper. Temp. (°C) -40 to +85
BudgetaryPrice (See Notes) 8.15


MAX14921ECS+ - Integrated Circuits by Analog Devices

ANALOGUE FRONT END DEVICE TQFP-80

Status: Unknown
Series: -
RoHS: Unknown
Download Datasheet Visit Manufacturer Site View Pricing & Stock

The MAX14920/MAX14921 battery measurement analog front-end devices accurately sample cell voltages and provide level shifting for primary/secondary battery packs up to 16 cells/+65V (max). The MAX14920 monitors up to 12 cells, while the MAX14921 monitors up to 16 cells. Both devices simultaneously sample all cell voltages, allowing accurate state-of-charge and source-resistance determination. All cell voltages are level shifted to ground reference with unity gain, simplifying external ADC data conversion. The devices have a low-noise, low-offset amplifier that buffers differential voltages of up to +5V, allowing moni- toring of all common lithium-ion (Li+) cell technologies. The resulting cell voltage error is Q0.5mV. The devices’ high accuracy make them ideal for monitoring cell chemistries with very flat discharge curves, such as lithium-metal phosphate. Passive-cell balancing is supported by external FET drivers. Integrated diagnostics in the devices allow open-wire detection and undervoltage/overvoltage alarms. The devices are controlled by a daisy-chainable SPI interface. The MAX14920 is available in a 64-pin (10mm x 10mm) TQFP package with an exposed pad. The MAX14921 is available in an 80-pin (12mm x 12mm) TQFP package. Both devices are specified over the -40°C to +85°C extended temperature range.

Specifications

Battery Type Li-Ion
IC Interface Type SPI
No. of Batteries -
Supply Voltage Min 6V
Supply Voltage Max 65V
Battery IC Case Style TQFP
No. of Pins 80Pins
Operating Temperature Min -40°C
Operating Temperature Max 85°C
Product Range -
Automotive Qualification Standard -
RoHS Phthalates Compliant To Be Advised
MSL MSL 3 - 168 hours
SVHC No SVHC (15-Jan-2018)
IC Function Analogue Front End Device
IC Package Type TQFP

Alternative Descriptions

MAX14921ECS+,Battery Mgmt | RS
Analogue Front End, Li-Ion, Tqfp-80 | Newark Electronics
ANALOGUE FRONT END DEVICE, TQFP-80 | element14

Frequently Asked Questions

Where can I find additional details, specifications and documents for a MAX14921ECS+ ?

Additional datasheets, footprints and schematics for MAX14921ECS+ are listed on our Part Details page. You can also find images and similar parts to MAX14921ECS+ on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for MAX14921ECS+ on our Product Comparison page. Access via the 'View Pricing & Stock' button to view MAX14921ECS+ price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the MAX14921ECS+ you can contact the distributor directly for product support, shipping queries etc.

Is the MAX14921ECS+ RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for MAX14921ECS+ have stock available?

Authorised distributors including RS, Newark Electronics, element14 and Farnell have stock available or on a lead time for MAX14921ECS+ .

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for MAX14921ECS+ often in real-time on the comparison pages.

What if I can't find stock of MAX14921ECS+ ?

You can fill out our help required form which you can use to request a quote for MAX14921ECS+ from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.

We use cookies to improve your experience. See our privacy policy.
Okay