MAX14483AAP+ by Analog Devices

6-Channel, Low-Power, 3.75kVRMS SPI Digital Isolator

Status: Active
Series: MAX14483
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

The MAX14483 is a 6-channel, 3.75kVRMS digital galvanic isolator using Maxim’s proprietary process technology. The six signal channels are individually optimized for SPI applications and include very low propagation delay on the SDI, SDO, and SCLK channels. The SDO channel’s tri-state control is enabled by the active-low CS input as well as a second enable control input pin active-low SDOEN, allowing a single MAX14483 to isolate multiple SPI devices. To simplify system design, an open drain active-low FAULT output can be wire ORed with error outputs from other devices. In addition, an auxiliary channel (AUX) is available for passing timing or control signals from the master side to the slave side and power monitors (SAA, SBA) are provided for both power domains to signal if the opposite side of the isolator is ready for operation. Independent 1.71V to 5.5V supplies on each side of the isolator also make the device suitable for use as a level translator. The MAX14483 has an isolation rating of 3.75kVRMS for 60 seconds and is available in a 20-pin SSOP package with 5.5mm of creepage and clearance. The package material has a minimum comparative tracking index (CTI) of 400V, which gives it a group II rating in creepage tables. The MAX14483 is rated for operation at ambient temperatures of -40°C to +125°C.

Prices starting from US$4.63


Distributor Starting From Stock
Logo for element14 element14 US$4.98
418
Buy Now
Logo for Newark Electronics Newark Electronics US$6.13
-
Buy Now
View Full Pricing & Stock Comparison

Features

Saves Space and Components 6 Isolated Channels in a 20-SSOP Package
6 Isolated Channels in a 20-SSOP Package
Low Propagation Delay on SCLK, SDI, and SDO Up to 100MHz Clock, 200Mbps Data Rate 10ns Typical Propagation Delay 2ns Maximum Pulse Width Distortion 250ps Typical Peak Jitter
Up to 100MHz Clock, 200Mbps Data Rate
10ns Typical Propagation Delay
2ns Maximum Pulse Width Distortion
250ps Typical Peak Jitter
Robust Galvanic Isolation of Digital Signals Withstands 3.75kVRMS for 60s (VISO) Continuously Withstands 450VRMS (VIOWM) Withstands ±10kV Surge between GNDA and GNDB with 1.2/50μs Waveform High CMTI (50kV/μs, Typical)
Withstands 3.75kVRMS for 60s (VISO)
Continuously Withstands 450VRMS (VIOWM)
Withstands ±10kV Surge between GNDA and GNDB with 1.2/50μs Waveform
High CMTI (50kV/μs, Typical)
Flexible System Design Wide 1.71V to 5.5V Voltage Range on Each Side Active-Low SDOEN Control Pin for Sharing Isolators Open-Drain Active-Low FAULT Channel for Shared Interrupt on Master Side Auxiliary Channel for Timing or Control
Wide 1.71V to 5.5V Voltage Range on Each Side
Active-Low SDOEN Control Pin for Sharing Isolators
Open-Drain Active-Low FAULT Channel for Shared Interrupt on Master Side
Auxiliary Channel for Timing or Control
Low Power Consumption 1.53mW per Channel at SCLK = 10MHz with VDD = 3.3V 0.77mW per Channel at SCLK = 10MHz with VDD = 1.8V
1.53mW per Channel at SCLK = 10MHz with VDD = 3.3V
0.77mW per Channel at SCLK = 10MHz with VDD = 1.8V

Specifications

# Channels 6
Insulation Rating 3750VRMS
# Uni-directional Inputs (Side A) 2
# Uni-directional Inputs (Side B) 4
Uni-directional Data Rate (Mbps) (max) 200
Oper. Temp. (°C) -40 to +125
Package/Pins SSOP HYBRID/20
BudgetaryPrice (See Notes) 3.65


MAX14483AAP+ Semiconductors - ICs by Analog Devices

DIGITAL ISOLATOR SPI 6 CH SSOP-20

Status: Unknown
Series: -
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

Specifications

No. of Channels 6 Channel
Propagation Delay 10ns
Supply Voltage Min 1.71V
Supply Voltage Max 5.5V
Interface Case Style SSOP
No. of Pins 20Pins
Operating Temperature Min -40°C
Operating Temperature Max 125°C
Product Range -
Automotive Qualification Standard -
MSL MSL 1 - Unlimited
SVHC No SVHC (15-Jan-2018)

Alternative Descriptions

DIGITAL ISOLATOR, SPI, 6 CH, SSOP-20 | element14
Digital Isolator, Spi, 6 Ch, Ssop-20 | Newark Electronics

Frequently Asked Questions

Where can I find additional details, specifications and documents for a MAX14483AAP+ ?

Additional datasheets, footprints and schematics for MAX14483AAP+ are listed on our Part Details page. You can also find images and similar parts to MAX14483AAP+ on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for MAX14483AAP+ on our Product Comparison page. Access via the 'View Pricing & Stock' button to view MAX14483AAP+ price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the MAX14483AAP+ you can contact the distributor directly for product support, shipping queries etc.

Is the MAX14483AAP+ RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for MAX14483AAP+ have stock available?

Authorised distributors including element14, Farnell and Newark Electronics have stock available or on a lead time for MAX14483AAP+ .

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for MAX14483AAP+ often in real-time on the comparison pages.

What if I can't find stock of MAX14483AAP+ ?

You can fill out our help required form which you can use to request a quote for MAX14483AAP+ from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.

We use cookies to improve your experience. See our privacy policy.
Okay