DS2786G+T&R by Analog Devices

Stand-Alone OCV-Based Fuel Gauge

Status: Active
Series: DS2786
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

The DS2786 estimates available capacity for rechargeable Li-Ion and Li-Ion Polymer batteries based on the cell voltage in the open-circuit state following a relaxation period. The open-circuit voltage (OCV) is used to determine relative cell capacity based on a lookup table stored in the IC. This capability makes accurate capacity information available immediately after a battery pack is inserted. During periods of moderate to high rate discharging, which preclude OCV measurements, the DS2786 uses coulomb counting as a secondary means of estimating relative capacity. Remaining capacity is reported in percent, along with cell voltage, current and temperature information. Cell characteristics and application parameters used in the calculations are stored in on-chip EEPROM. The DS2786 is intended for use on the host side of portable devices, though it can also be mounted within a battery pack. Measurement and estimated capacity data are accessed through an I²C interface. Temperature data is available from an on-die sensor. Resistance measurements of a pack identification resistor and pack thermistor are supported by ratiometric measurements on two auxiliary inputs.

Prices starting from US$3.38


Distributor Starting From Stock
Logo for Newark Electronics Newark Electronics US$3.80
962
Buy Now
Logo for element14 element14 US$3.53
962
Buy Now
View Full Pricing & Stock Comparison

Features

Relative Capacity Calculated from Combination Coulomb Counter and Open-Circuit Cell Voltage (OCV) Battery Model
Accurate Warning of Low Battery Conditions Even On First Cycle (No Learn Cycle Needed)
12-Bit Battery Voltage Measurement: ±10mV Accuracy 1.22mV LSB, 0V to 5V Input Range
±10mV Accuracy
1.22mV LSB, 0V to 5V Input Range
11-Bit Bidirectional Current Measurement: 25µV LSB, ±51.2mV Dynamic Range 1.67mA LSB, ±3.4A (RSNS = 15mΩ)
25µV LSB, ±51.2mV Dynamic Range
1.67mA LSB, ±3.4A (RSNS = 15mΩ)
Current Accumulation Measurement Resolution: ±204.8mVh Range ±13.65Ah (RSNS = 15mΩ)
±204.8mVh Range
±13.65Ah (RSNS = 15mΩ)
Internal Temperature Measurement: 0.125°C LSB, ±3°C Accuracy
0.125°C LSB, ±3°C Accuracy
Two 11-Bit Aux Input Voltage Measurements: ±8 LSB Accuracy, Ratiometric Inputs Eliminate Supply Accuracy Issues
±8 LSB Accuracy, Ratiometric Inputs Eliminate Supply Accuracy Issues
VOUT Pin Drives Resistive Dividers, Reduces Current Consumption
2-Wire Interface
Low Power Consumption: Active Current: 50µA typ, 80µA max Sleep Current: 1µA typ, 3µA max
Active Current: 50µA typ, 80µA max
Sleep Current: 1µA typ, 3µA max

Specifications

Functions Fuel Gauge
Battery Type 1 Cell Li-Ion3-Cell NiMH
Interface 2-Wire
User Data Storage (Bytes) 32 EEPROM
Parameters Measured CurrentTemperatureVoltage
End Equipment Host
VSUPPLY (V) (min) 2.5
VSUPPLY (V) (max) 5.5
Package/Pins TDFN/10
Oper. Temp. (°C) -40 to +85
BudgetaryPrice (See Notes) 2.61


DS2786G+T&R Semiconductors - ICs by Analog Devices

BATT FUEL GAUGE LI-ION 4.5V TDFN-10

Status: Unknown
Series: -
RoHS: Unknown
View Datasheet Manufacturer Site View Pricing & Stock

Specifications

Battery Management Function Fuel Gauge
Battery Type Li-Ion Li-Pol
Supply Voltage Min 2.5V
Supply Voltage Max 4.5V
Battery IC Case Style TDFN
No. of Pins 10Pins
IC Interface Type Serial
Operating Temperature Min -20°C
Operating Temperature Max 70°C
Product Range -
RoHS Phthalates Compliant To Be Advised
MSL MSL 1 - Unlimited
SVHC No SVHC (15-Jan-2018)

Alternative Descriptions

Batt Fuel Gauge, Li-Ion, 4.5V, Tdfn-10 | Newark Electronics
BATT FUEL GAUGE, LI-ION, 4.5V, TDFN-10 | element14

Frequently Asked Questions

Where can I find additional details, specifications and documents for a DS2786G+T&R ?

Additional datasheets, footprints and schematics for DS2786G+T&R are listed on our Part Details page. You can also find images and similar parts to DS2786G+T&R on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for DS2786G+T&R on our Product Comparison page. Access via the 'View Pricing & Stock' button to view DS2786G+T&R price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the DS2786G+T&R you can contact the distributor directly for product support, shipping queries etc.

Is the DS2786G+T&R RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for DS2786G+T&R have stock available?

Authorised distributors including Newark Electronics, element14 and Farnell have stock available or on a lead time for DS2786G+T&R .

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for DS2786G+T&R often in real-time on the comparison pages.

What if I can't find stock of DS2786G+T&R ?

You can fill out our help required form which you can use to request a quote for DS2786G+T&R from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.

We use cookies to improve your experience. See our privacy policy.
Okay