The DS1232LP/LPS Low Power MicroMonitor Chip monitors three vital conditions for a microprocessor: power supply, software execution, and external over-ride. First, a precision temperature- compensated reference and comparator circuit monitors the status of VCC. When an out-of-tolerance condition occurs, an internal power-fail signal is generated which forces reset to the active state. When VCC returns to an in-tolerance condition, the reset signals are kept in the active state for a minimum of 250 ms to allow the power supply and processor to stabilize.
MPU SUPERVISOR/MONITOR, 0 TO 70DEG C; Threshold Voltage:4.37V; No. of Supervisors / Monitors:1Monitors; Supply Voltage Min:4.5V; Supply Voltage Max:5.5V; Reset Type:Active-High, Active-Low; Digital IC Case:DIP; No. of Pins:8Pins RoHS Compliant: Yes Newark Electronics
Processor Supervisor 4.62V/4.37V 4.5V to 5.5V 8-Pin PDIP N Avnet America
Supervisor Integrated Circuit; power on reset monitor (PoR) Transfer Multisort Elektronik
Processor Supervisor 4.62V/4.37V 4.5V to 5.5V 8-Pin PDIP N Avnet Europe
Processor Supervisor 4.62V/4.37V 4.5V to 5.5V 8-Pin PDIP N Avnet Asia
Power management IC [Maxim] DS1232LP+ Power management IC Distrelec
DS1232 Series 4.25 to 4.74V 1000 ms Through Hole Open Drain Monitor - DIP-8 Future Electronics