ADM483EARZ-REEL RS-485 and RS-422 by Analog Devices

Status: Production
Series: ADM483E
RoHS: Compliant
View Datasheet Manufacturer Site View Pricing & Stock

The ADM483E is a 5 V, low power data transceiver with ±15 kV ESD protection suitable for half-duplex communication on multipoint bus transmission lines. The ADM483E is designed for balanced data transmission and complies with TIA/EIA Standards RS-485 and RS-422, which allow up to 32 transceivers on a bus.The ADM483E has a low current shutdown mode in which it consumes only 0.1 μA. Because only one driver is enabled at any time, the output of a disabled or power-down driver is three-stated to avoid overloading the bus. Drivers are short-circuit current-limited and are protected against excessive power dissipation by thermal shutdown circuitry that places their outputs into a high impedance state. The receiver input has a fail-safe feature that guarantees a logic high output if the input is open circuit. The ADM483E is fully specified over the industrial temperature ranges and is available in 8-lead SOIC_N packages.

Prices starting from US$0.49


Distributor Starting From Stock
Logo for Transfer Multisort Elektronik Transfer Multisort Elektronik US$0.49
6,134
Buy Now
Logo for Analog Devices Analog Devices US$1.99
2,500
Buy Now
Logo for Chip One Stop Chip One Stop US$1.86
2,074
Buy Now
Logo for Newark Electronics Newark Electronics US$2.20
-
Buy Now
Logo for element14 element14 US$1.59
-
Buy Now
Logo for Richardson RFPD Richardson RFPD US$1.85
-
Buy Now
View Full Pricing & Stock Comparison

Features

±15 kV ESD protection
250 kbps data rate
Reduced slew rate for low EM interference
Single 5 V ± 10% supply
−7 V to +12 V bus common-mode range
Up to 32 nodes on the bus
Receiver open-circuit, fail-safe design
Short-circuit protection
36 μA supply current
0.1 μA shutdown current

Alternative Descriptions

IC: interface | Transfer Multisort Elektronik
5KV RS-485 I.C. | Analog Devices
Rs422/Rs485 Transceiver, -40 To 85Deg C | Newark Electronics
INTERFACE - TRANSCEIVER | Richardson RFPD
RS422/RS485 TRANSCEIVER, -40 TO 85DEG C | Farnell


Frequently Asked Questions

Where can I find additional details, specifications and documents for a ADM483EARZ-REEL?

Additional datasheets, footprints and schematics for ADM483EARZ-REEL are listed on our Part Details page. You can also find images and similar parts to ADM483EARZ-REEL on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for ADM483EARZ-REEL on our Product Comparison page. Access via the 'View Pricing & Stock' button to view ADM483EARZ-REEL price breaks, MOQs, lead times, inventory and SKUs from distributors.

What category does ADM483EARZ-REEL fall under?

The ADM483EARZ-REEL is listed under RS-485 and RS-422.

Can I view similar or alternative parts?

You can view similar parts to ADM483EARZ-REEL when available in the RS-485 and RS-422 range under the specifications section at the bottom of the details page.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the ADM483EARZ-REEL you can contact the distributor directly for product support, shipping queries etc.

Is the ADM483EARZ-REEL RoHS compliant?

Yes. This part has been flagged as RoHS Compliant by Analog Devices.

Which authorised distributors for ADM483EARZ-REEL have stock available?

Authorised distributors including Transfer Multisort Elektronik, Analog Devices, Chip One Stop, Newark Electronics and element14 have stock available or on a lead time for ADM483EARZ-REEL.

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for ADM483EARZ-REEL often in real-time on the comparison pages.

What if I can't find stock of ADM483EARZ-REEL?

You can fill out our help required form which you can use to request a quote for ADM483EARZ-REEL from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.

We use cookies to improve your experience. See our privacy policy.
Okay