AD737JNZ

Electronic & Electrical Components

> Semiconductors - ICs

> Data & Signal Conversion

distributor space
Organise Price Comparison Results by
Distributor Statistics for AD737JNZ
Total in Stock: -in-stock
Lowest MOQ: -
SELECT OPTIONS
Lowest price for your selection
-
in Stock
-
Average Price: - per unit
Stocking Distributors: -
Price Comparison for AD737JNZ
Series Information for AD737JNZ - Analog Devices

Features

  • feature
    Computes True rms value Average rectified value Absolute value Provides 200 mV full-scale input range (larger inputs with input scaling) Direct interfacing with 3u00bd digit CMOS analog-to-digital converters (ADCs) High input impedance: 1012 u03a9 Low input bias current: 25 pA maximum High accuracy: u00b10.2 mV u00b1 0.3% of reading RMS conversion with signal crest factors up to 5 Wide power supply range: u00b12.5 V to u00b116.5 V Low power: 25 u03bcA (typical) standby current No external trims needed for specified accuracy The AD737 output is negative going; the AD736 is a positive output-going version of the same basic device

Description

IC RMS TO DC CONVERTER DIP8 737

The AD737 is a low power, precision, monolithic, true rms-to-dc converter. It is laser trimmed to provide a maximum error of ±0.2 mV ± 0.3% of reading with sine wave inputs. Furthermore, it maintains high accuracy while measuring a wide range of input waveforms, including variable duty cycle pulses and triac (phase) controlled sine waves. The low cost and small physical size of the AD737 make it suitable for upgrading the performance of non-rms precision rectifiers in many applications. Compared to these circuits, the AD737 offers higher accuracy at equal or lower cost. The AD737 computes the rms value of both ac and dc input voltages, and is ac-coupled by adding an input capacitor. In this mode, the AD737 resolves input signal levels of 100 μV rms or less, despite variations in temperature or supply voltage. High accuracy is maintained for input waveforms with crest factors of 1 to 3 and crest factors at 2.5% or less with respect to full-scale input level. The AD737 has no output buffer amplifier, thereby significantly reducing dc offset errors occurring at the output and making the device highly compatible with high input impedance ADCs. Requiring only 160 μA of power supply current, the AD737 is optimized for use in portable multimeters and other battery- powered applications. In power-down mode, the standby supply current in is typically 25 μA. The AD737 has both high (1012 Ω) and low impedance input options. The high-Z FET input connects high source impedance input attenuators, and a low impedance (8 kΩ) input accepts rms voltages of up to 0.9 V while operating from the minimum power supply voltage of ±2.5 V. The two inputs can be used either single-ended or differentially. The AD737 achieves 1% of reading error bandwidth, exceeding 10 kHz for input amplitudes from 20 mV rms to 200 mV rms, while consuming only 0.72 mW. The AD737 is available in two performance grades. The AD737J and AD737K grades operate over the commercial temperature range of 0°C to 70°C. The AD737JR-5 is tested with supply voltages of ±2.5 V dc. The AD737A grade operates over the industrial temperature range of −40°C to +85°C. The AD737 is available in two low cost, 8­lead packages: PDIP and SOIC_N.

Specifications

Accuracy %:
0.3%
Bandwidth:
190kHz
Operating Temperature Min:
0°C
Operating Temperature Max:
70°C
Digital IC Case:
DIP
No. of Pins:
8Pins
Supply Voltage Range:
2.8V -3.2V to ± 16.5V
Product Range:
AD737 Series
MSL:
MSL 1 - Unlimited
SVHC:
No SVHC (07-Jul-2017)
Base Number:
737
IC Case Style:
DIP
IC Generic Number:
737
IC Temperature Range:
Commercial
Logic Function Number:
737
Operating Temperature Range:
0°C to +70°C
Power Dissipation Pd:
200mW
Supply Current:
160µA
Supply Voltage Max:
16.5V
Supply Voltage Min:
2.8V
Total Error:
0.3%

Alternate Descriptions

RS Components
RMS to DC Converter 8-Pin PDIP
Newark Electronics
RMS to DC Converter, Low Power, 0.3 %, 190 kHz, 0 C, 70 C, DIP, 8 RoHS Compliant: Yes
Conrad
Integrated circuits from leading manufacturers. Please read our extensive documentation which is free to download.
RS Components UK
RMS to DC Converter 8-Pin PDIP
RS Components DE
DC-Wandler True RMS AD737JNZ / 160μA, PDIP 8-Pin Montage-Typ : Durchsteckmontage Abmessungen : 9.27 x 6.35 x 3.3mm Länge : 9.27mm Breite : 6.35mm Betriebstemperatur max. : +70 °C Ausgangsstrom max. : 160µA Betriebstemperatur-Bereich : 0 → +70 °C Ausgangsstrom-Bereich : 0,16 mA, Analog Devices
RS Components HK
RMS to DC Converter 8-Pin PDIP
RS Components JP
半導体,信号変換
RS Components FR
RMS to DC Converter 8-Pin PDIP
RS Components CN
RMS to DC Converter 8-Pin PDIP
RS Components ES
RMS to DC Converter 8-Pin PDIP
RS Components NL
IC TRUE RMS/DC CONV LP 8-DIP
RS Components NO
RMS to DC Converter 8-Pin PDIP
RS Components US
IC TRUE RMS/DC CONV LP 8-DIP
RS Components SG
IC TRUE RMS/DC CONV LP 8-DIP
RS Components TW
IC TRUE RMS/DC CONV LP 8-DIP